Panasonic WV-SFR631L Operating Instructions Manual

Also see for WV-SFN611L: Important information Important information Installation guide

Contents

Panasonic WV-SFR631L Operating Instructions Manual Manual pdf 141 page image

The description below is the configuration of the priority stream that can transmit images without deterioratingthe image quality and refresh interval even when multiple users access concurrently.Priority stream[Activation]Select “On” or “Off” to determine whether or not to use the priority stream.• Default: OffNote• When “On” is selected for “Activation” of “Priority stream”, number of users who can access the cameramay be limited.[Destination IP address(1)]Enter the first destination IP address.[Destination IP address(2)]Enter the second destination IP address.[Stream type]Select “JPEG(1)”, “JPEG(2)”, “JPEG(3)”, “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)”.• JPEG(1): JPEG(1) images will be transmitted.• JPEG(2): JPEG(2) images will be transmitted.• JPEG(3): JPEG(3) images will be transmitted.• H.264(1): H.264(1) images will be transmitted.• H.264(2): H.264(2) images will be transmitted.• H.264(3): H.264(3) images will be transmitted.• H.264(4): H.264(4) images will be transmitted.• Default: JPEG(1)Note• When “Best effort” is selected for “Transmission priority” of “H.264”, bit rate will vary between themaximum and minimum rates while images are being transmitted.[Refresh interval*]Select the refresh interval from the following.This setting is validated only when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Stream type”.0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*• Default: 1fpsOperating Instructions 14115 Configure the settings relating to the authentication [User mng.]