– Stream(2): 1536kbps*– Stream(3): 1024kbps*– Stream(4): 1024kbps** The range of bit rates that can be configured for H.265 (or H.264) bit rates differs depending on the“Transmission priority” and “Image capture size”.When “Constant bit rate”, “Frame rate”, or “Best effort” is selected for “Transmission priority”• QVGA, 400x300, VGA, 320x180, and 640x360: 64kbps - 4096kbps*• 800x600: 128kbps* - 4096kbps*• 1280x960 and 1280x720*1: 256kbps* - 8192kbps*• 1920x1080*1: 512kbps* - 14336kbps*S113xS153xS253xS223xS213x• 2048x1536: 1024kbps* - 24576kbps*S113xS153xS253xS223xS213xWhen “VBR” is selected for “Transmission priority”• QVGA, 400x300, VGA, 320x180*1, and 640x360*1: 64kbps - 12288kbps*• 800x600: 128kbps* - 12288kbps*• 1280x960 and 1280x720*1: 256kbps* - 12288kbps*• 1920x1080*1: 512kbps* - 24576kbps*S113xS153xS253xS223xS213x• 2048x1536: 1024kbps* - 24576kbps*S113xS153xS253xS223xS213x*1 When 60fps mode is selected, settings up until 24576kbps can be configured.Note• The bit rate for “Stream” is restricted by “Bandwidth control(bit rate)” on the [Network] tab on the“Network” page (®page 152). When a value with “*” attached is set, images may not be streamed.[Image quality]Select the image quality of H.265 (or H.264) images from the following.• For “Constant bit rate”, “Frame rate”, and “Best effort”: Motion priority/Normal/Quality priority• “VBR”: 0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low• Default: 5 Normal[Smart Coding] - [GOP control]By using “GOP control”, the transmission data volume can be reduced when there is little motion in the image.• When “H.265” is selected as the “Stream encoding format”: Off/On(Low)/On(Mid)/On(Advanced)• When “H.264” is selected as the “Stream encoding format”: Off/On(Low)/On(Mid)• Default: OffNote• This setting is available when “Transmission priority” is set to “VBR”.• When using “GOP control”, the refresh interval is increased when streaming H.265 (or H.264) images.For this reason, do not use it when the network environment has frequent errors.[Smart Coding] - [Smart Facial Coding]Maintains high image quality in the areas of the image containing people's faces and moving objects, andreduces the transmission data volume in other areas of the image.• Off: Does not use “AUTO VIQS” and “Smart Facial Coding”.• On(AUTO VIQS): Maintains high image quality in the areas of the image containing moving objects, andreduces the transmission data volume in other areas of the image.• On(Smart Facial Coding): Maintains high image quality in the areas of the image containing people'sfaces and moving objects, and reduces the transmission data volume in other areas of the image.92 Operating Instructions2 Settings
