2The lightning flash with arrowhead sym-bol, within an equilateral triangle, isintended to alert the user to the presenceof uninsulated "dangerous voltage" withinthe product's enclosure that may be ofsufficient magnitude to constitute a risk ofelectric shock to persons.The exclamation point within an equilater-al triangle is intended to alert the user tothe presence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance.SA 1966SA 1965NOTE: This equipment has been tested and found to complywith the limits for a Class A digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference when theequipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radiocommunications.Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will berequired to correct the interference at his own expense.FCC Caution: To assure continued compliance, (example -use only shielded interface cables when connecting to com-puter or peripheral devices). Any changes or modificationsnot expressly approved by the party responsible for compli-ance could void the user’s authority to operate this equip-ment.For U.S.AThis Class A digital apparatus complies with Canadian ICES-003.For CanadaCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNING:• This apparatus must be earthed.• To prevent fire or electric shock hazard, do not expose thisapparatus to rain or moisture.• The apparatus should not be exposed to dripping orsplashing and that no objects filled with liquids, such asvases, should be placed on the apparatus.• All work related to the installation of this product should bemade by qualified service personnel or system installers.• The connections should comply with local electrical code.The serial number of this product may be found on the sur-face of the unit.You should note the model number and serial number ofthis unit in the space provided and retain this book as a per-manent record of your purchase to aid identification in theevent of theft.Model No.Serial No.For U.S.A