Panasonic WV-NS202A Installation Manual

Also see for Super Dynamic III WV-NS202A: Product catalog Integration note Brochure Reference Product catalog

Contents

Panasonic WV-NS202A Installation Manual Manual pdf 5 page image

5The network camera WV-NS202A is designed to operate using a PC on a network (10BASE-T/100BASE-TX).By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via anetwork. *1Progressive output with the super dynamic 3 functionSUPER-D 3 compensates brightness on a pixel-to-pixel basis so that it produces clearer images even if objects havevarious illumination intensities. The progressive output (with motion adaptive interlace/progressive conversion*)achieves high resolution image display.* Motion adaptive interlace/progressive conversion functionThe motion adaptive interlace/progressive conversion function compensates aliasing of images (that is specific tointerlace scan when shooting motion) and converts images into progressive images. By converting into progres-sive images, clear images of both motion and stationary objects will be created.JPEG/MPEG-4 dual encodeMPEG-4 images can be monitored while recording JPEG images.Power over Ethernet (IEEE802.3af compliant) function is featuredWhen connecting with a PoE (Power over Ethernet) device, power will be supplied by simply connecting a LAN cable.Interactive communication with audio (transceiver type) is availableBy using the audio output connector and the microphone in connector, receiving audio from the camera on a PC andtransmitting audio from the PC to the camera is available. (Transceiver type is the communication type thatreceives/transmits audio alternately between two operators. It is impossible to receive/transmit audio simultaneouslybetween them.)High power lens and high accuracy preset position functionA single camera provides wide area monitoring.Upside-down installation is availableThe camera can be installed not only on the ceiling but also on desktop.When using an optional mount bracket, embedded installation on a ceiling or mounting on a wall is available.Simple Black & white modeImages will be displayed clear even at night since the camera will be automatically switched from the color mode tothe black and white mode under low illumination condition.SD memory card slotImages can be recorded on an optional SD memory card*2 both automatically (when images fail to transmit using theFTP periodic transmission function) and manually.*1 It is necessary to configure the network settings of the PC and its network environment to monitor images andaudio from the camera on the PC. It is also necessary that a web browser is installed on the PC.*2 Performance with this camera has been checked by using Panasonic’s SD memory cards (64 MB, 128 MB,256 MB, 512 MB, 1 GB, and 2GB). If another SD memory card is used, this camera may not operate properly.PrefaceFeatures