Panasonic WV-NS202 Network Operating Instructions

Also see for WV-NS202 - i-Pro Network Camera: Integration note Network operating instructions Instructions

Contents

Panasonic WV-NS202 Network Operating Instructions Manual pdf 44 page image

44Configure the settings relating to the camera action at an alarm occurrenceClick the [Alarm] tab on the "Alarm setup" page. ( page 15) Camera motion on alarmThe settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages43, 46 and 47 for further information about the settings relating to the alarm, the alarm image and the alarm outputterminal.[Terminal alarm 1]Select an action to be taken when a terminal alarm 1 isdetected from the following.OFF: Does not take any action even when a terminalalarm 1 is detected.1-64: When the registered preset position is selected,the camera will move to the selected preset positionwhen a terminal alarm 1 is detected.Auto track: When a terminal alarm 1 is detected, thecamera will move to the home position and start theauto tracking.Alarm permission: Receives a terminal alarm 2 and 3while detecting a terminal alarm 1.VMD permission: Permits to detect video motion (VMDfunction) while detecting a terminal alarm 1.Access permission: Permits access from all the usersregistered on the "User" page ( page 54) whiledetecting a terminal alarm1. Permits access fromusers whose access level is "1" while no detecting aterminal alarm 1.Default: OFFImportant:When "Access permission" is selected for "Terminalalarm 1", select "ON" for "User authentication" onthe [Authentication] tab ( page 54).[Terminal alarm 2]Select an action to be taken when a terminal alarm 2 isdetected from the following.OFF: Does not take any action even when a terminalalarm 2 is detected.1-64: When the registered preset position is selected,the camera will move to the selected preset positionwhen a terminal alarm 2 is detected.Auto track: When a terminal alarm 2 is detected, thecamera will move to the home position and start theauto tracking.Default: OFF[Terminal alarm 3]Select an action to be taken when a terminal alarm 3 isdetected from the following.OFF: Does not take any action even when a terminalalarm 3 is detected.1-64: When the registered preset position is selected,the camera will move to the selected preset positionwhen a terminal alarm 3 is detected.Auto track: When a terminal alarm 3 is detected, thecamera will move to the home position and start theauto tracking.Default: OFF"AUX" is the terminal that can be switched between"OPEN" and CLOSE" from the "Live" page. It is usefulwhen controlling the connected external device. Forexample, when it is necessary to control lighting at thecamera location, connect a lighting control device to theterminal (AUX OUT) of the camera to remotely controllighting at the camera location.[VMD alarm]Select an action to be taken when a VMD alarm isdetected from the following.OFF: Does not take any action even when a VMD alarmis detected.1-64: When the registered preset position is selected,the camera will move to the selected preset positionwhen a VMD alarm is detected.