Panasonic WV-NP244 Operating Instructions Manual

Also see for WVNP244 - COLOR CCTV CAMERA: Product catalog Integration note Brochure Reference Reference

Contents

Panasonic WV-NP244 Operating Instructions Manual Manual pdf 14 page image

14Installations/ConnectionsBefore start the installation/connection, prepare the required devices and cables.Before starting the connection, turn the power of the devices including the camera and the PCoff or disconnect the AC adapters from the outlet.Step 1Fix an optional camera mount base onto thedesired place and mount the camera on it.When attaching an optional camera mountbase on the bottom of the camera, use theremoved screws to attach the camera mountbase.Otherwise, it may cause a drop or malfunc-tion.Important:Method of installation may be differentdepending on the material of the placewhere the camera is to be installed.Step 2Connect the monaural mini plug (ø3.5 mm) tothe monitor out connector (for adjustment) onthe rear of the camera. (Only when adjustingthe angular field of view)Important:The monitor out connector is providedonly for checking the adjustment theangular field of view on the video monitorwhen installing the camera or when serv-icing.It is not provided for recording/monitor-ing use.Step 3Connect the power cable.• When using AC 24 V/DC 12 V powersupply• When using PoE (Power over Ethernet:IEEE802.3af compliant)Connect a LAN cable (category 5 or bet-ter) between a PoE device (such as aPoE hub) and the network connector ofthe camera.Fixing screwTripod mount baseINITIAL SETGNDPOWER10BASE-T/100BASE-TXSDCARDMONITOR OUTEXT I/O1 2 3 4LINK ACTAC 24V IN : 1L – 2NDC 12V IN : ! – @Connect to the videomonitor, etc.+–DC12 VAC24 VGND wireGNDPOWERSDCARDEXT I/O1 2 3 4AC 24V IN : 1L – 2NDC 12V IN : ! – @