Panasonic WV-NP1000 Operating Instructions Manual

Also see for WVNP1000 - NETWORK CAMERA: Integration note Network operating instructions Manual Operating instructions

Contents

Panasonic WV-NP1000 Operating Instructions Manual Manual pdf 4 page image

4Step 1Start up the web browser.Step 2Enter the IP address designated using the Panasonic IPsetup software in the address box of the browser.(Example: http://192.168.0.10)Important:• When the HTTP port number is changed from "80",enter the IP address of the camera after "http://", forexample "http://192.168.0.11".• Configure the web browser to not use the proxyserver. Refer to the network administrator whenusing the proxy server.The following are descriptions of how to monitor images from the camera on a PC.Monitor images from a single cameraMonitoring Images on a PCStep 3Press the [Enter] key on the keyboard.→ Live images will be displayed.Notes:• When "ON" is selected for "User Authentication", theauthentication window will be displayed before dis-playing live images for the user name and passwordentries. The default user name and password are asfollows.User Name: adminPassword: 12345To enhance the security, change the password forthe user "admin". It is recommended to change thispassword periodically.• When "Unicast" is selected for "Transmission type"( page 24), up to 8 users can access the cameraconcurrently. When 8 users have been concurrentlyaccessing already, the access limit message will bedisplayed for users who accessed subsequently.• When "ON" is selected for "MPEG-4 transmission"( page 24), MPEG-4 image will be displayed.When "OFF" is select, JPEG image will be dis-played. It is possible to display JPEG image evenwhen "ON" is selected for "MPEG-4 transmission".In this case, the refresh interval will be limited.The refresh interval may be longer depending on anetwork environment, PC spec, photographic sub-ject, access traffic, etc.Refer to the following page for further information aboutthe "Live" page.