Panasonic WV-NP1000 Operating Instructions Manual

Also see for WVNP1000 - NETWORK CAMERA: Integration note Network operating instructions Manual Operating instructions

Contents

Panasonic WV-NP1000 Operating Instructions Manual Manual pdf 29 page image

29[Alarm image FTP transmission]Select "ON" or "OFF" to determine whether or not totransmit the alarm image to the FTP server.Default: OFF[Directory]Enter the directory name where the alarm images are tobe saved.Number of characters for the directory name:0 - 256 characters[File name]Enter the file name used for the alarm image to betransmitted to the FTP server. The file name will be asfollows.["Entered file name" + "Time and date (year/month/day/hour/minute/second)"] + "Serial number"Number of characters for the file name: 1 - 32 char-actersDefault: (blank)[Transmission interval]Select the transmission interval for the alarm image FTPtransmission from the following.0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fpsDefault: 1 fps[Number of images]Select the number of images to be transmitted from thefollowing.10 pics/20 pics/30 pics/50 pics/100 pics/1000 pics/2000 pics/3000 pics/4000 pics/5000 picsDefault: 100 pics[Recording duration]Approximate time to be taken to save the set "number ofimages" with the set "transmission interval" will be dis-played.Configure the settings relating to the alarm image [Alarm image setup]Click the [Alarm] tab on the "Alarm setup" page. ( page 28)The settings relating to the alarm image to be transmitted to the FTP server can be configured on this page. Thealarm image will be transmitted to the FTP server. To transmit alarm images to the FTP server, it is necessary toconfigure the settings in advance. ( page 38)The settings for resolution and image quality on the "JPEG/MPEG-4" tab ( page 23) will be applied to alarmimages.Refer to pages 29 and 30 for further information about the settings relating to the alarm image and the alarm outconnector.