Panasonic WV-NM100 Quick Reference Manual

Also see for WVNM100 - NETWORK COLOR CAMERA: Brochure & specs Operating instructions Operating instructions

Contents

Panasonic WV-NM100 Quick Reference Manual Manual pdf 13 page image

14Set parameters for each item."IP Address""Subnet Mask""Default Gateway""HTTP Port"Enter parameters depending on your environ-ment.For further information about the parameters,refer to pages 16, 18, 20 or 22."DHCP""DNS"Click the [Enable] radio button when using theDHCP and the DNS.When using the DNS function, enter the“Primary DNS Server address” and the“Secondary DNS Server address”.• If DHCP is enabled although there is noDHCP server in the network, check“Disable” for DHCP in the “Panasonic IPSetup” window.• If DHCP is enabled, and the DHCP serverhas not assigned an IP address yet,“0.0.0.0” is displayed for the IP address. TheIP address of the camera will be displayedafter the DHCP server assigns one to thecamera.Click the [SET] button after completing the set-ting.It takes around 20 seconds to complete thesettings of the camera after the [SET] buttonis pressed. If the AC adapter or the Ethernetcable is detached before the settings are com-pleted, the settings may not be performed cor-rectly.! ImportantSTEP5NotesSTEP4The setup window appears.Screenshot 2SETUPSETUP