Panasonic WV-CW504SE Installation Manual

Also see for WV-CW504SE: Operating instruction Operating instructions

Panasonic WV-CW504SE Installation Manual Manual pdf 32 page image

32About the setup menusPerforming each setting item in the setup menu should be completed in advance to use this unit.Perform the settings for each item in accordance with the conditions of the camera shooting area.Refer to the operating instructions (PDF) for further information.Setup menu listSetup item DescriptionCAMERA ID This item specifies the camera title. The camera title that indicates thecamera location and other information about the camera is createdwith alphanumerics and symbols, and is displayed on the screen.CAMERA Performs the camera operation settings.SCENE1/SCENE2 Selects a scene file. It is possible to register and save the settings as ascene file in case that it is necessary to change the settings such whenshooting at night or on holidays.ALC Selects the method of controlling the quantity of light.SHUTTER Specifies the electronic shutter speed.AGC Specifies gain adjustment.SENS UP Specifies electronic sensitivity enhancement.WHITE BAL Specifies white balance adjustment.DNR Selects the level of the digital noise reduction function.BW MODE Performs each setting regarding the black-and-white mode such asswitching between color and black-and-white images.i-VMD Performs settings regarding intelligent VMD (Video Motion Detector)such as motion detection and object abandonment/removal detection.SYSTEM Performs the settings regarding the camera system such as synchroni-zation and privacy zone.SYNC Specifies the synchronization type.LENS Performs automatic adjustment of the focus.PRIVACY ZONE Hides undesired portions in the camera shooting area.STABILIZER Decides whether or not to enable the image stabilizer.EL-ZOOM Toggles the electronic zoom on and off.UPSIDE-DOWN Enables the vertical and horizontal flip function.BACK-FOCUS Selects the back focus setting type and performs fine adjustment.