Panasonic WV-CW480 Specification Sheet

Also see for Super Dynamic III WV-CW480S: Brochure & specs Specifications Operating instructions Operating instructions

Contents

specifications

Panasonic WV-CW480 Specification Sheet Manual pdf 2 page image

• All TV pictures/menu are simulated.• Weights and dimensions are approximate.• Specifications are subject to change without notice.• These products may be subject to export control regulations.• Product pictures shown in this catalog are all NTSC models.SpecificationsTV System NTSC PALType WV-CW484S: Surface mount type WV-CW480S: Surface mount typeWV-CW484F: Flush mount typeCamera Image Sensor 1/3-type interline transfer CCDEffective Pixels 768 (H) x 494 (V) 752 (H) x 582 (V)Scanning Mode 2:1 interlace scanScanning Area 4.8 (H) x 3.6 (V) mmScanning Frequency Horizontal: 15.734 kHz Horizontal: 15.625 kHzVertical: 59.94 Hz Vertical: 50.00 HzScanning Line 525 lines 625 linesHorizontal Resolution 540 TV lines typical at color high mode,480 TV lines at color normal mode, 570 TV lines at B/W modeMinimum Illumination Color (30IRE): Color (30IRE):1.5 lux (SENS UP: OFF), 0.6 lux (SENS UP: OFF),0.15 lux (SENS UP: 10x) at F1.4 0.06 lux (SENS UP: 10x) at F1.4B/W (10IRE): B/W (10IRE):0.16 lux (SENS UP: OFF), 0.08 lux (SENS UP: OFF),0.016 lux (SENS UP: 10x) at F1.4 0.008 lux (SENS UP: 10x) at F1.4Will be same as PAL spec withWV-CW4C optional clear dome coverSignal-to-Noise Ratio 50 dB (AGC Off, Weight On)White Balance ATW1, ATW2, or AWCLight Control ALC / ELC (only when monitor output is used)AGC ON (HIGH / MID / LOW), or OFFSuper Dynamic III ON or OFF (with BLC masking 8 x 6 areas)Dynamic Range 52 dB typical (Super Dynamic III ON) 54 dB typical (Super Dynamic III ON)Electronic Shutter OFF (1/60), 1/100, 1/250, 1/500, OFF (1/50), 1/120, 1/250, 1/500,1/1,000, 1/2,000, 1/4,000, 1/10,000 s 1/1,000, 1/2,000, 1/4,000, 1/10,000 sElectronic Sensitivity UP OFF / AUTO (2x, 4x, 6x, 10x) / FIX (2x, 4x, 6x, 10x, 16x, 32x)Digital Noise Reduction High / LowResolution Mode Normal / HighBlack and White Mode Mode: AUTO1 / AUTO2 / ON / OFF,Level: High / Low, with external controlDigital Zoom 2xVideo Motion Detection OFF / Mode1 (VMD) / Mode2 (Scene change), Sensitivity 256 steps, Mask 8 x 6 areasScene Change Detaction Yes, Included in VMD Mode2Privacy Zone ON (Gray / Mosaic) or OFFAuto Image Stabilizer ON or OFFCamera Title Up to 16 charactersLens Mount CS-mountBack Focus Adjustment ABF, MANUAL, AUTO / PRESET / FIXSynchronization Internal (INT), Multiplexed Vertical Drive (VD2), Line-Lock (LL)Lens Focal Length 3.8 ~ 8.0 mm, 2x varifocalAngular Field of View H: 35.6° (TELE) ~ 73.6° (WIDE) V: 26.6° (TELE) ~ 53.4° (WIDE)Maximum Aperture Ratio 1:1.4 (WIDE) 1:1.8 (Tele)Focusing Range 1.2 m (3.9 ft.) ~ ∞Pan and Panning Range ±175°Tilt Tilting Range ±75°Input / Video Output 1.0 V [p-p] / NTSC composite 75 Ω / 1.0 V [p-p] / PAL composite 75 Ω /Output BNC Connector Multiplexed VD2 BNC Connector Multiplexed VD2and control data capable and control data capableMonitor Output 1.0 V [p-p] / 75 Ω / 1.0 V [p-p] / 75 Ω /NTSC composite signal / PAL composite signal /ø3.5 mm mini jack ø3.5 mm mini jackGeneral Setup Method OSD setup menuLanguage English, Russian (For setup menu and camera ID), German,French, Italian, Spanish (For setup menu), Chinese,Japanese (For camera title. Setup menu will be English.)Safety/EMC Standard UL (6500 Edition2), CE (EN60065, EN55022,FCC (Part15 ClassA), EN55024, ClassB),C-UL (E60065), GOST (R 51558).DOC (ICES003 ClassA)Power Source and 24 V AC 60 Hz, 4.1 W, 11 W*, WV-CW480S:Power Consumption 12 V DC 340 mA** 220 V ~ 240 V AC 50 Hz,7 W, 13 W*WV-CW484F:24 V AC 50 Hz, 4.1 W, 11 W*,12 V DC 340 mA**Ambient Operating –10 °C ~ +50 °C (14 °F ~ 122 °F),Temperature –30 °C ~ +50 °C (–22 °F ~ 122 °F)*Ambient Operating Humidity 90 % or less (without condensation)Water and Dust Resistance IP66, IEC60529 measurement standard compatible.Dimensions WV-CW484S: WV-CW480S:ø158.3 mm x 146.2 mm ø160 mm x 161.7 mm(ø6-1/4" x 5-3/4") (ø6-5/16" x 6-3/8")WV-CW484F: ø154 mm x 141.2 mm (ø6-1/16" x 5-9/16")Weight (approx.) WV-CW484S: 1.9 kg (4.18 lbs.) WV-CW480S: 2.1 kg (4.62 lbs.)WV-CW484F: 1.4 kg (3.08 lbs.)Part Names and FunctionsAppearanceDISTRIBUTED BY:WV-CW484S(Surface mount type)WV-CW480SWV-CW484F(Flush mount type)Unit: mm (inches)Above figures are for NTSC model.Figures for PAL model are slightly different.http://panasonic.co.jp/pss/cctv/en/Printed in Japan (2A-011AL)Power Cable (WV-CW480S, 220 ~ 240 V AC)Power Cable (WV-CW484F, 24 V AC or 12 V DC)Video Output Cable with BNC ConnectorEnclosureFocus Lock LeverZoom Lock LeverTilting Lock ScrewAzimuthPanning TablePanning Lock ScrewCamera Lock ScrewMonitor Output JackOptional Heater ConnectorLED IndicatorOperation ButtonsSET ButtonDOWN ButtonUP ButtonLEFT ButtonRIGHT Button109.7(4-5/16")57.2(2-1/4")52.5(2-1/16")84.85(3-5/16")84.85(3-5/16")WV-CW484S: 36.5(1-7/16")WV-CW480S: 52(2-1/16")WV-CW484S: 225(8-7/8")WV-CW480S: 425(16-3/4")WV-CW484S: 260(10-1/4")WV-CW480S: 1,835(72-1/4")WV-CW484S: 146.2(5-3/4")WV-CW480S: 161.7(6-3/8")0.5(1/32")0.5(1/32")ø105.3(ø4-1/8")WV-CW484S: ø158.3(ø6-1/4")WV-CW480S: ø160(ø6-5/16")225(8-7/8")141.2(5-9/16")ø105.3(ø4-1/8")ø154(ø6-1/16")ø81(ø3-3/16")52.5(2-1/16")57.2(2-1/4")109.7(4-5/16")31.5(1-1/4")0.5(1/32")33.1(1-5/16")83.5(3-5/16")260(10-1/4") 33.1(1-5/16")46(1-13/16")46(1-13/16")92(3-5/8")4-Mounting Surface4-ø4.8 Attachment Bore77(3-1/16")Important– Safety Precaution: carefully read the operating instructions and installation manual before using this product.* With optional Heater Unit WV-CW4H** Optional Heater Unit WV-CW4H cannot be used under 12 V DC operation

/ 2

Related manuals for Panasonic Super Dynamic III WV-CW480S