Panasonic WV-CW334S Operating Instructions Manual

Also see for WV-CW334S: Specifications

Panasonic WV-CW334S Operating Instructions Manual Manual pdf 24 page image

24Adjust the cameraz Pan, tilt and azimuth adjustmentImportant:• Do not touch the iris motor. Failure toobserve this may cause trouble.• Do not hold the camera by the lens unitwhen adjusting panning, tilting, or azimuth.Detach the inner dome from the camera bypicking the front and rear sides.Note:• Do not touch the lens.At the same time as the pan and tilt adjust-ments, make the zoom and focus adjustmentsin Step 2.q Rotate the panning table to adjust the pan-ning position of the camera. (Range: 320°)• The adjusting range is from +180 ° (clock-wise) to –140 ° (counterclockwise).• Tighten the panning table lock screw afteradjustingw Rotate the tilting table to adjust the tiltingposition of the camera (Range: ±75 °).• This lens can also be rotated in the reversedirection, but the image azimuth isreversed. In such a case, turn the panningtable to the 180 ° side to correct the azi-muth image.• When used at an angle that is close to hor-izontal, it must be noted that the shadowof the dome cover may be projected.• Fasten the tilting lock screws of both sidesafter adjusting.Pick the portion markedin the illustration as wellas the opposite side.Pick the portion markedin the illustration as wellas the opposite side.CW: +180 °Panning lock screwPanning tableCCW: –140 ° Indication: CCD up sideTilting lockscrew (x2)Variable tilt angle: ±75 °