24Screenshot 2The setup mode changes to "ENABLE", andthe setup menu becomes ready to be set. Step 3Move the cursor to the item to be set, andpress the setting button.Screenshot 1Hold down the setting button for more than2 seconds simultaneously to call up the topscreen of the setup menu.Step 1Press the up button or the down button tomove the cursor to "END".Step 2Press the right button to move the cursorto "SETUP", and press the setting button tochange the setup mode from "DISABLE" to"ENABLE".MODEL WV-CP500 SERIESCAMERA ID OFFCAMERASYSTEMBACK-FOCUSSPECIALLANGUAGEEND SETUP DISABLEMODEL WV-CP500 SERIESCAMERA ID OFFCAMERASYSTEMBACK-FOCUSSPECIALLANGUAGEEND SETUP ENABLEBasic operationThe description below explains how to operate the setup menu basically.The operations in the setup menu are performed with the operation buttons (☞ pages 9 and 10)after calling up the setup menu on the connected video monitor.The operations in the setup menu can also be performed through the system controller (option).