Panasonic WV-CP310 Operating Instructions Manual

Also see for WV-CP300G: Installation guide Operating instructions

Contents

Panasonic WV-CP310 Operating Instructions Manual Manual pdf 12 page image

12Back light compensation functionFollow the procedure below.Step 1Set “ALC/ELC” to “ALC”, and press the [SET] button.→The “ALC CONT” screen appears.Note:• When “ALC/ELC” is set to “ELC” or “ALC+” and the [SET] button is pressed, the “ELC CONT” or “ALC+ CONT” screen will appear.Step 2Move the cursor to “BLC” and select from the following options.ON: Automatically compensate when the background is brighter than the subject.OFF (default): This mode is used when the area in front of the subject is extremely bright.Step 3Move the cursor to “ABS” and select from the following options.ABS (Auto Black Stretch Technology)The latest digital signal technology is applied to automatically detect the dark areas in the image, acquire the brightness data aroundthe dark areas, and perform real-time color adjustment by calculating the best correction curve for each area. This function can beused to perform real-time adjustment and correction of back light and dark area, and reproduce natural, clear images.ON: Uses ABS.OFF (default): Does not use ABS.Note:• When “BLC” is set to “ON”, “ABS” displays “---” and may not be operated.Step 4When “BLC” is set to “OFF”, bright areas of an image are masked to facilitate the visibility of dark areas.Move the cursor to “MASK SET” and press the [SET] button.→ The mask setting screen appears.Step 5Press the [UP], [dOWN], [righT], and [LEFT] buttons to move the flashing cursor to the area to be masked and press the [SET]button.When the selected area is masked, the masked area will start blinking (between stripes and white). When the flashing cursor is movedto other areas, the masked area will be displayed in white.Repeat the above procedure to mask other areas as necessary.Note:• To cancel the masking, select the masked area to be canceled, and then press the [SET] button. The masked area will be deleted.“ALC CONT” screen Mask setting screen“CAMERA SETUP” screen**ALC CONT**(1)BACK LIGHT COMPOFFABSMASK SET- +LEVEL .I..... 0RET TOP ENDBLC OFF**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHAUTO1VMD OFFRET TOP ENDD&N(IR)