Panasonic WV-CP310/G Installation Manual

Also see for WV-CP300G: Operating instructions Operating instructions

Contents

Panasonic WV-CP310/G Installation Manual Manual pdf 12 page image

12Major operating controls and their functions(Side view) (Bottom view)(Rear view)

45UPSET7213220 V-240 V~50/60 Hz VIDEO OUT624V~IN 2-N 1-L12V IN VIDEO OUT23(UP)UP(DOWN) SET(LEFT) (RIGHT)1 AC power input terminal [220 V-240 V~50/60 Hz]Connect with the supplied power cord.2 Video output connector [VIDEO OUT]Provides video output to system units.3 Tripod mount baseThis is used to install the camera onto themount bracket (locally procured).4 ALC lens connectorConnects to ALC lens (4-pin).5 Back focus adjustment screwAdjusts the back focus distance andimage focal length.6 Power input terminal [12 V IN, 24 V~IN]The power supply of 24 V AC or 12 V DC isconnected to this terminal.7 Setup button [SET]Press the [SET] button once and the "FOCUSADJUSTMENT" screen will be displayed.Hold down the [SET] button for more than2 seconds and the setup menu screen willbe displayed.• [LEFT]/[RIGHT]: Press the [RIGHT] or [LEFT]button to move to the right or left in themenu, or change the displayed values.• [UP]/[DOWN]: Press the [UP] or [DOWN]button to move up or down in the menu.( T h e d i re c t i o n s o f " U P " , " D O W N " ,"LEFT"and "RIGHT" are as shown whenyou are directly facing "UP".)• [SET]: Press this button in the menu toconfirm the selected value or function.In addition, this button is used to opensubmenus.