Panasonic WV-CF5SA Manual

Also see for WV-CF5SA: Operating instructions

Panasonic WV-CF5SA Manual Manual pdf 1 page image

How to Attach the "Dome Cover Sheet" onto Compatible Products ** WV-SFN531, WV-SFN310A, WV-SFN311A (as of December 2015)Read the following descriptions together with the Operating Instructions of thedome cover and the Operating Instructions of the camera.Step1 Remove the enclosure from the cameraUse the bit included with the camera to loosen the 2 screws that secure theenclosure, and then remove the enclosure from the camera body.Step2 Remove the clear dome cover1. Remove the dome cover sheet fromthe enclosure.● Keep the removed dome coversheet for future use.2. The clear dome cover is locked usingthe enclosure hooks (3 parts).Remove one hook at a time whilepushing the clear dome coverinwards.Step3 Mount the dome cover (WV-CF5SA)1. Remove the cover film from the outside of the dome cover. Keep the removedcover film for future use. Take care not to damage the outside or inside of thedome cover.2. Align the notched area of the dome cover to the stoppers (2 pcs.) of theenclosure, and then mount the dome cover.● After mounting the dome cover, reattach the cover film. Be careful not todirectly touch nor damage the dome cover.3. Align the notched area of the dome cover sheet to the stoppers (2 pcs.) of theenclosure, and then mount the dome cover.● Attach the dome cover sheet with the spongy surface facing the front.Clear dome cover EnclosureDome cover sheetEnclosure hooks(3 parts)● Push the sheeted side of thedome cover into the gap betweenthe enclosure hooks and the domecover, and attach the 3 parts oneat a time.● If there are fingerprints or dirt onthe inside of the dome cover, wipeit clean with a soft cloth.Step4 Attach the enclosure to the camera.Secure the camera to the enclosure with the 2 enclosure fixing screws.The recommended tightening torque of the enclosure fixing screws is 0.59 N・m{6 kgf・cm}.● If a "screen adjustment" is necessary after replacing the dome cover, refer tothe Operating Instructions.● Remove the cover film after installation is complete.● If there are fingerprints or dirt on the dome cover, wipe it clean with a soft cloth.avs0615-2125 PGQW1803XA Printed in ChinaNotched areaEnclosurestoppers(2 parts)Dome cover sheet Dome cover(WV-CF5SA)EnclosureDome cover(WV-CF5SA)EnclosurePush the plastic on thebottom of the domecover sheet into thehooks so that theyclamp the dome cover.Enclosure hookEnclosure hook● A gap may form between the dome coverand the dome cover sheet.This will be resolved once attaching theenclosure to the camera and will not affectthe performance of the camera.

/ 2

Related manuals for Panasonic WV-CF5SA