Panasonic WJ-RT208 Operating Instructions Manual

Also see for WJRT208 - Digital Disk Recorder: Reference

Panasonic WJ-RT208 Operating Instructions Manual Manual pdf 53 page image

53Setting itemAvailable valuesAvailable valuesAvailable values"Alarm Port""Alarm Enable""Line Speed"5. Camera Setup (CAMERA SETUP)Note: The parameters for this unit can be defined for each channel.6. Communication Setup (COMMUNICATION SETUP)6.1 Network Setup (NETWORK SETUP)6.2 RS485 Setup (RS485 SETUP)Setting item"Channel No.""CH Enable""Mask Area""Mask Enable""PTZ Protocol""Rec. Reserve""Channel Name"Default setting1"On"–"Off""PANASONIC"000"CH1"1 - 8"Off/On"–"Off/On""PANASONIC/TYPE 1/TYPE 2/TYPE 3/TYPE 4"000 - 200"en: 10 letters, em: 5 letters"Setting item"IP Address""Subnet Mask""Gateway""Server Port""Protocol""Alarm Center IP"Default setting192.168.000.088255.255.255.000192.168.000.0012000"TCP"192.168.000.1884000"Off""Auto Mode"001.000.000.000 - 255.255.255.255000.000.000.000 - 255.255.255.254001.000.000.000 - 255.255.255.2551024 - 9999"TCP/UDP/MCAST"001.000.000.000 - 255.255.255.2551024 - 9999"Off/On""Auto Mode/10M Half/10M Full/100M Half/100M Full"Setting item"Baud Rate""Data Bit""Parity""Stop Bit"Default setting192008"None"12400/4800/9600/19200/38400– (FIX)– (FIX)– (FIX)6.3 Data port setup (DATA PORT SETUP)Available values"Unit Address (System)""Baud Rate""Data Bit""Parity""Stop Bit""Retry Timing""Alarm Data""Channel No."Default setting00196008"None"1"Off""1s"-001 - 0992400/4800/9600/19200/38400– (FIX)"None/Even/Odd"1/2"Off/100ms/200ms/400ms/1000ms""Off/0s/1s/5s"-