Panasonic WJ-RT208 Operating Instructions Manual

Also see for WJRT208 - Digital Disk Recorder: Reference

Panasonic WJ-RT208 Operating Instructions Manual Manual pdf 45 page image

453.2 Search and Playback(1) Press the [MENU] button. "WJ-RT208 SETUP MENU" isdisplayed.(2) Move the cursor to "SEARCH" and press the [SET] but-ton.The "SEARCH" dialogbox will be displayed.(3) Move the cursor to "Channel No.", and enter the desirednumber.Caution: If Channel No. is set at "0", data of all chan-nels are checked.(4) Move the cursor to "Start" and enter a starting time to bechecked.(5) Move the cursor to "End" and enter a ending time to bechecked.(6) Move the cursor to "Event Only", and select "Yes" or"No"."Yes": Manually recorded data are not retrieved. Theevent record data only are retrieved."No": Retrieval is attempted from all record data.(7) Move the cursor to [OK] and press the [SET] button.The "SEARCH RESULT" screen is displayed.Caution: All record data from the starting time till theending time are displayed.Up to 5 000 record data can be displayed.When there are 5 000 records or more for the chan-nel to be played, the latest 5 000 records will besubject to be played.(8) Use the direction button (up/down) and select theimages to be played.Move the cursor to [Prev] or [Next] and press the [SET]button in order to browse data.Move the cursor to [Return] and press the [SET] button.The screen returns to "SEARCH".(9) Press the [SET] button.The selected image data are played.For playback operation, refer to 2.3.2.Caution: When the record starting time is set at thetime preset for checking, and if the time data arecontained in part of the recorded data, the record-ed data will be played starting at the preset recordstarting time.Note: If no operation is carried out, the key lock opera-tion will be carried out automatically. Playback willnot stop even when the key lock operation is carriedout during playback.If you leave this unit for a long time, you should stopplayback to maintain security.3.3 Backup by External HDDThis unit can record a data backup with an external HDDincluding a 2.5-inch external hard disk. (Usually, an exter-nal hard disk can be used.) In order to avoid data loss dueto hard disk malfunction or sudden accidents, we recom-mend recorded data backup with external media.Notes:1. When an external HDD is used, initialization is usuallyunnecessary. The data on the external HDD are deletedduring data backup. Prior to starting data backup,therefore, it is necessary to examine if any importantdata are contained on the external HDD.2. If the connection cable is pulled out in the middle ofdata backup, the external HDD may be damaged. Theconnection cable can be pulled out only if data backupis completed and the appropriate prompt dialog box isdisplayed.3. Connect the external hard disk to the COPY1 connectorat the back or the COPY2 connector on the front. It isimpossible to connect the external hard disk to bothconnectors at the same time.SEARCH5Channel No.2004-10-22 11:30:30Start2004-10-27 11:30:30EndNoOK CancelEvent OnlyPrev Next ReturnSEARCH RESULTCH Quality Start12345678SFFQGQNQEXSFFQGQ2005-01-242005-01-242005-01-242005-01-242005-01-242005-01-242005-01-242005-01-2410:43:2210:43:2210:43:2210:43:2210:43:2210:43:2210:43:2210:43:222005-01-242005-01-242005-01-242005-01-242005-01-242005-01-242005-01-242005-01-2410:53:2210:53:2210:53:2210:53:2210:53:2210:53:2210:53:2210:53:22EndPage 001/001WJ-RT208 SETUP MENUSYSTEM MANAGEMENTSEARCHREC&EVENT SETUPPTZ SETUPCAMERA SETUPCOMMUNICATION SETUPREPORTUSER INFORMATIONDATA MANAGEMENT