Panasonic WJ-ND300 Setup Instructions

Also see for WJ-ND300 Administrator Console: Product catalog Manual Operating instructions Network Setup Operating instructions

Contents

Panasonic WJ-ND300 Setup Instructions Manual pdf 33 page image

33CONTINUE: Recording will not stop until the [ALARMRESET] button is pressed.Note:When "MANUAL" is selected for "Time" (recordingduration), recording will be performed for at least 8seconds at an event occurrence as long as thealarm is not canceled.The following are available for "Operation Mode" (eventaction mode). Refer to the Operating Instructions (PDF)for further information about each event action mode.ADM (Activity Detection Mode): Performs recording,preset function and writing an event log at an eventoccurrence. Other event actions will not be per-formed.ALM (Alarm Mode): Performs recording, preset func-tion and writing an event log, supplying the alarmoutput and sounding the buzzer according to the set-tings for "Event Setup".OFF: Performs only recording of the event log. Otherevent actions will not be performed. EVENT SETUPPerform the settings for the alarm output duration andthe buzzer sound duration at an event (camera sitealarm, terminal alarm or command alarm) occurrence.The following are available for alarm output duration.When OFF is selected, the alarm output will not be sup-plied.(s: second, min: minute)1 s - 30 s (in 1 second intervals)/40 s/50 s/1 min/2 min/3 min/4 min/5 minEXT: The alarm output will continue until the [ALARMRESET] button is pressed.OFF: No alarm output is supplied.REC: The alarm output will be supplied during recordingis being performed.The following are available for "Buzzer" (buzzer soundduration).When OFF is selected, a buzzer will not sound.1 s - 30 s (in 1 second intervals)/40 s/50 s/1 min/2 min/3 min/4 min/5 minEXT: The buzzer will continue until the ALARM RESETbutton is pressed.OFF: The buzzer will not sound.REC: The buzzer will sound only during recording isbeing performed. Power ON Manual RECSelect ON or OFF to determine whether or not to startrecording when the power is turned on by the connectedexternal timer (or the switch).ON: Manual recording will start automatically after com-pleting the system check.OFF: Manual recording will not start automatically aftercompleting the system check.