Panasonic WJ-ND300 Setup Instructions

Also see for WJ-ND300 Administrator Console: Product catalog Manual Operating instructions Network Setup Operating instructions

Contents

Panasonic WJ-ND300 Setup Instructions Manual pdf 32 page image

32Setup items REC TypeSelect "QUICK" or "ADVANCED" for validation of the recording settings.QUICK: The recording settings set on the setup menu (Quick) will be validated when recording.ADVANCED: The recording settings set on the setup menu (Advanced) will be validated when recording.Note:• When "QUICK" is selected, the setup menu (Quick) will be displayed by clicking the [Setup] tab. When"ADVANCED" is selected, the setup menu (Advanced) will be displayed by clicking the [Setup] tab.• When "QUICK" is selected, the following setup items of "Schedule" (Advanced) will not function. When it is nec-essary to function the following items, select "ADVANCED".* To perform the schedule recording, perform the settings for "Time Table" and "Program".[Measurement] ButtonIt is possible to start calculation of maximum value ofrecording rate/transmission rate (ips) that can be set for"Live video", "Manual recording" and "Event recording"by clicking this button.Recording will stop for around 90 seconds due to thecalculation. LIVE VIDEOSet the transmission rate of live images from cameras.The following are available for the transmission rate.OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips Manual REC OperationPerform the recording rate for manual recording.The following are available for "Recording Rate".OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips EVENT RECSet the recording rate, recording duration and the eventaction mode when an event (site alarm, terminal alarm,command alarm) occurs.The following are available for "Recording Rate".OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/10 ips/15 ipsThe following are available for "Time" (recording dura-tion).1 s - 10 s (in 1 second intervals)/20 s/30 s/1 min -10 min (in 1 minute intervals)/20 min/30 min/40 min/50 min/ 60 minMANUAL: Recording will be performed while alarm sig-nals (camera site alarm, terminal alarm, commandalarm) are being supplied.SubmenuTime TableSetup items StatusFTP SEND BY PERIODIC TIMER DisabledERROR REPORT MAIL DisabledFTP Alarm Sending DisabledAlarm Message Functions normally (Fixed to ON.)Individual Alarm Notification DisabledAlarm Message DisabledProgramSpecial DaysProgram 1 - 4 The settings performed on the setup menu(Advanced) will not be validated.The settings performed on the setup menu(Quick) will be validated. *Disabled