40 Serial Data and Host Port Setup [420]This menu lets you set the parameters for communication between the ports and the connected appliance.To connect a device via the DATA PORT (such as a matrix switcher or system controller), set the parameter in the [421 SERI-AL DATA PORT].To connect a device via the HOST PORT (such as a personal computer), set the parameter in the [422 HOST PORT].No setup is necessary when the DATA port and the HOST ports are not used.4 2 0 S E R I A L / H O S T P O R T4 2 1 S E R I A L D A T A P O R T ↓4 2 2 H O S T P O R T ↓↑ ↓ : M O V E E N T : S E L E C T E S C : P R V1 Move the cursor to the item 421 by pressingthe  or  button. Then press the ENTERbutton.The [421 SERIAL DATA PORT] menu appears on the moni-tor screen.2 Move the cursor to the desired itemparameter and select an item mode bypressing the Direction buttons.The selected parameter will be underlined in the menuwhen the cursor is moved to another item parameter bypressing the  or  button.• RATESelect the Baud Rate (communication speed in bps) bypressing the Direction buttons.When 9600 bps is set in the menu, the audio quality islimited to G.728.• DATA BITSSelect 7 or 8 in the Data Bits (data length) by pressingthe Direction buttons.• STOP BITSSelect 1 or 2 in the Stop Bits by pressing the Directionbuttons.• PARITYSelect a desired Parity Check by pressing the Directionbuttons.3 Press the ESC button to return to theprevious [420 SERIAL / HOST PORT] menu.d4 2 1 S E R I A L D A T A P O R TR A T E : 4 8 0 0 9 6 0 0D A T A B I T S : 8 7S T O P B I T S : 1 2P A R I T Y : N O N E 0 D D E V E NI F 9 6 0 0 I S S E L E C T E D , A U D I O I SR E S T R I C T E D T O G 7 2 8 .↑ ↓ : M O V E ← → : S E L E C T E S C : P R V Serial Data Port Setup [421]The setting must be compatible with the device con-nected.Refer to the operating instructions of the device con-nected for further setting details.Note

operating instructions

front view

wv-cu20e remote controller (option)

switching power on/off

basic information

calling a site by quick dialing

calling a site by one-touch dialing

switching video to transmit

muting audio to transmit

how to check

how to use the controller

basic menu operation

mode setup

receiving registration

local number registration

calling and called number checks

sequential dialing methods

serial data and host port setup

host port setup

audio setup

video setup

cable compensation setup

alarm dialing tables setup

alarm memory method setup

lock item setup

menu password setup

remote control setup

video motion setup

calling log display

serial data port setup verification

version verification

mode verification

installation manual

rack mounting

standard system configuration

camera connections

sensor operation

for personnel attending to isdn line work

specifications for parallel ports

specifications for setting dip switches

Panasonic WJ-AV20 Operating Instructions Manual

WJ-AV20

Panasonic WJ-AV20 Operating Instructions Manual

Product

Learn More

Legal