Panasonic WH-MXC09G3E5 Operating Instructions Manual

Also see for WH-MXC09G3E5: Service manual

2Thank you for purchasing Panasonicproduct.Before operating the system, read theseoperating instructions thoroughly and keep themfor future reference.Table of contentsSafety precautions …………………………… 3-5To adjust initial settings ……………………… 6-7How to use ………………………………… 8-12Maintenance …………………………………… 12Troubleshooting ……………………………13-14Information …………………………………… 15Air-to-WaterHeatpump(mono-bloc unit)Power SupplySolar PanelRadiatorShowerFan Coil UnitFloorHeatingWater Tank UnitRemote ControlBefore use, make sure the systemhas been installed correctly by anauthorised dealer according to thegiven instructions.• Panasonic (Mono bloc) Air-to-Water Heatpump is designed tooperate with Panasonic Water Tank Unit. Unless used togetherwith the Panasonic Water Tank Unit, Panasonic does notguarantee any normal operation nor the reliability of the system.• These operating instructions describe how to operate the systemusing the mono bloc unit.• As for the operation of other products such as water tank,radiator, external thermo controller, and underfloor units, refer tothe operating instructions of each product.• System could be locked to operate in HEAT mode and disableCOOL mode.• Some functions described in this manual may not be applicableto your system.• Consult your nearest authorised dealer for further information.*1 The system is locked to operate without COOL mode. It can beunlocked only by authorised installers or our authorised servicepartners.*2 Only displayed when COOL mode is unlocked(Means when COOL mode is available).The illustrations in this manual are for explanation purposes only and may differ from the actual unit.They are subject to change without notice for future improvement.Operating conditionsHEATING *1 COOLINGWater outlet temperature (°C)(Min. / Max.) 25 / 55 5 / 20Outdoor ambient temperature (°C)(Min. / Max.) -20 / 35 16 / 43When the outdoor temperature is out of therange in the table, the heating capacity will dropsignificantly and the mono bloc unit may stopoperating for its protection.The unit will restart automatically after the outdoortemperature returns to the specified range.System overview