Panasonic WH-MHF09G3E5 Operating Instructions Manual

Also see for WH-MHF09G3E5: Planning and installation manual Planning and installation manual Service manual Service manual

4Do not touch the mono bloc unitduring lightning, it may cause anelectric shock.Do not sit or step on theunit, you may fall downaccidentally.Power supplyDo not use amodified cord, jointcord, extensioncord or unspecifiedcord to preventoverheating and fire.To prevent overheating, fire orelectric shock:• Do not share the same poweroutlet with other equipment.• Do not operate with wet hands.• Do not bend or twist powersupply cord.If the supply cord is damaged,it must be replaced by themanufacturer, service agent orsimilarly qualified persons inorder to avoid a hazard.This unit is equipped withResidue Current Circuit Breaker(RCCB). Ask an authoriseddealer to check RCCB operationregularly, especially afterinstallation, inspection, andmaintenance. RCCB malfunctionmay result in electric shock and/or fire.It is strongly recommended thatInstall Residual Current Device(RCD) on-site to prevent electricshock and/or fire.Before obtaining access toterminals, all supply circuits mustbe disconnected.Stop using the product if anyabnormality/failure occurs anddisconnect the power supply.(Risk of smoke/fire/electricshock)Examples of abnormality/failure• RCCB trips frequently.• Burning smell is observed.• Abnormal noise or vibration ofthe unit is observed.• Hot water leaks from the unit.Contact your local dealerimmediately for maintenance/repair.Wear gloves during inspectionand maintenance.This equipment must be earthedto prevent electrical shock or fire.Prevent electric shock bydisconnecting the power supplybefore cleaning or servicing.This appliance is for multipleuses. To avoid electric shock,burn and/or fatal injury, makesure to disconnect all powersupplies before accessing anyterminal in the unit.Safety precautions