Panasonic Viera X50D series Operating Instructions Manual

Also see for Viera TH-P42X50D: Service manual

Panasonic Viera X50D series Operating Instructions Manual Manual pdf 36 page image

Displaying PC Screen on TV35Displaying PC Screen on TVThe screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.● To connect PC (p. 61)1 Display the screen of the PCPC ● Corresponding signals (p. 70)● If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported.PC menu setting● To make settings “How to Use Menu Functions” (p. 24)Menu Item Adjustments / Configurations (alternatives)PictureAdvanced SettingsWhite BalanceR-Gain, G-Gain, B-Gain Adjusts the white balance of bright red / green / blue areaR-Cutoff, G-Cutoff,B-Cutoff Adjusts the white balance of dark red / green / blue areaReset to Defaults Press the OK button to reset to the default White BalanceGammaGamma Switches the gamma curve [S Curve] / [1.8] / [2.0] / [2.2] / [2.4] / [2.6]● Please note the numerical values are reference for the adjustment.Reset to Defaults Press the OK button to reset to the default GammaSetupPC SetupInput ResolutionSwitches to a wide view:VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1,024 × 768pixels) / WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)● Options change depending on signalsClock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock PhaseEliminates flicker and distortion● Adjust after Clock adjustment● Set to the minimum level if noise occursSyncChooses another synchronous signal if the image is distorted[H & V] / [On Green][H & V]: by the horizontal and vertical signals from your PC[On Green]: by the green signal from your PC (if available)Reset to Defaults Press the OK button to reset [PC Setup] to the default settings● Other items (p. 25 - 29)Note● For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable(p. 68).