Panasonic Viera UT50A series Operating Instructions Manual

Also see for Viera TH-P42UT50Z: Service manual

Contents

Panasonic Viera UT50A series Operating Instructions Manual Manual pdf 78 page image

Using Network Services (DLNA / VIERA Connect)78Wired connection settingsThis setting is for the network connection by using the LAN cable.1 Select [Network Connection] and set to [Wired]Connection TestNetwork ConnectionWireless Network SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateWiredNew Software MessageNetwork StatusOnselectaccess / storeIf you make the network connection like “Example 2” (p. 76), you do nothave to set [Acquire DNS Address], [Proxy] and [Proxy Port].2 Select [IP/DNS Settings] and set the itemsIP/DNS Settings Accessselectaccess■ [Acquire IP Address] / [Acquire DNS Address]Sets [IP Address], [Subnet Mask], [Default Gateway] and [DNS Address].Select [Acquire IP Address] / [Acquire DNS Address] and set to [Auto] (recommended).Acquire IP Address AutoIP AddressSubnet MaskDefault GatewayAcquire DNS AddressDNS AddressProxy SettingsIP/DNS SettingsAuto● The available settings are displayed automatically.Manual settings([IP Address], [Subnet Mask], [Default Gateway], [DNS Address])selectaccess / store3 Select [Proxy Settings] and set the itemsIt is not required for normal household use.Acquire IP AddressIP AddressSubnet MaskDefault GatewayAcquire DNS AddressDNS AddressProxy SettingsIP/DNS SettingsAutoAutoAccessselectaccess● After settings, return to the previous menu.■ [Proxy]Sets Proxy address.● This is the address of the relay server that is connected to the target server instead of the browser and sends data tothe browser. Setting is required if specified by the provider.1. Select [Proxy] 2. Enter the address 3. Store0ProxyProxy PortProxy Settings ProxyHostselectaccessselectset● You can set characters by using numericbuttons. (p. 103)■ [Proxy Port]Sets Proxy port number.● This number is also specified by the provider with the Proxy address.1. Select [Proxy Port] 2. Move the cursor and enter the number0ProxyProxy PortProxy Settings