Identifying ControlsQuick Start Guide9TV16234578 9 101 CI slot (p. 46)2 Function select• [Volume] / [Contrast] / [Brightness] / [Colour] /[Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ /[Balance] / [Auto Setup] (p. 34, 35)∗[Music] or [Speech] mode in the Sound Menu3 Channel Up / Down, Value change (when using the Fbutton), Switching the TV On (press either button forabout 1 second when in Standby mode)4 Changes the input mode5 SD Card slot (p. 49)6 Headphones jack (p. 67)7 Mains power On / Off switch• Use to switch the mains power.If you turned the TV Off during Standby mode by theremote control last time, the TV will be in Standbymode when you turn the TV On with Mains power On/ Off switch.8 Remote control signal receiver• Do not place any objects between the TV remotecontrol signal receiver and remote control.9 C.A.T.S. (Contrast Automatic Tracking System)sensor• Senses brightness to adjust picture quality when [EcoMode] in the Picture Menu is set to [On] (p. 27)10 Power and Timer LED•Red : StandbyGreen : OnOrange : Timer Programming OnOrange (flash) :Recording of Timer Programming orDirect TV Recording in progressRed with orange flash :Standby with Timer Programming On or DirectTV Recording• The LED blinks when the TV receives a commandfrom the remote control.Using the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu.Operation guideOperation guide will help you to operate by using theremote control.Example : [Sound Menu]Sound MenuMode MusicOffOffOver 30cmBass 0011TrebleBalanceHeadphone VolumeSurroundAuto Gain ControlVolume CorrectionSpeaker Distance to Wall1/200Select EXIT Page upChangeRETURN Page downOperation guideHow to use remote controlMENU Open the main menuMove the cursor / select the menu itemMove the cursor / adjust levels / select from arange of optionsAccess the menu / store settings afteradjustments have been made or options havebeen setRETURNReturn to the previous menuEXIT Exit the menu system and return to the normalviewing screenAuto power standby functionThe TV will automatically go to Standby mode in the following conditions :• no signal is received and no operation is performed for 30 minutes in Analogue TV mode• [Off Timer] is active in the Setup Menu (p. 16)• no operation is performed for the period selected in [Auto Standby] (p. 33)• This function does not affect the recording of Timer Programming and Direct TV Recording.