6TVOK1 324 657 980+--+Accessories / OptionsBatteries for the RemoteControl Transmitter (2)• R6 (UM3)ClamperRemote ControlTransmitter• EUR7651110Standard accessories Check that you have the accessories and items shownOperating Instructions Pan European Guarantee CardInstalling remote’s batteriesCaution• Incorrect installation may cause batteryleakage and corrosion, resulting indamage to the remote control.• Do not mix old and new batteries.• Do not mix different battery types (suchas alkaline and manganese batteries).• Do not use rechargeable (Ni-Cd)batteries.• Do not burn or breakup batteries.1 PullopenHook2Note the correctpolarity (+ or -)CloseUsing the clamper• Do not bundle the RF cable and mains lead together (could causedistorted image).• Fix cables with clampers as necessary.• When using the optional accessory, follow the option’s assemblymanual to fix cables.To tighten:Keep theknob pressedRear of the TVTo loosen:Clamper(Standard accessory)Clamperthat bundlemains leadBundle thecables:Hook theclamper:TightLockBottom SheetUse when removing theTV Stand (see below)Optional accessoriesWall-hangingbracketTY-WK32LR2WWARNING!• Failure to use a Panasonic bracket or choosing to mount the unityourself will be done at the risk of the consumer.Any damage resulting from not having a professional installermount your unit will void your warranty.• Always be sure to ask a qualified technician to carry out set-up.Incorrect fitting may cause equipment to fall, resulting in injuryand product damage.• Do not mount the unit directly below ceiling lights (such asspotlights, floodlights or halogen lights) which typically give offhigh heat. Doing so may warp or damage plastic cabinet parts.How to remove the TV StandRemove four screws and take theTV Stand.Rear ofthe TVPlease contact your nearest Panasonic dealer to purchase the recommendedwall-hanging bracket. For additional details, please refer to the wall-hangingbracket installation manual.Attach the Bottom Sheet.Bottom ofthe TV