Panasonic Viera TX-26LXD70F Operating Instructions Manual

Panasonic Viera TX-26LXD70F Operating Instructions Manual Manual pdf 34 page image

OffOffOffSetup Menu 2/2VIERA LinkSoftware LicenseOnBanner Display Timeout 3 secondsInput LabelsSystem UpdateSystem InformationTime Zone AutoCommon InterfaceGUIDEINPUTASPECT DIRECT TV RECVCR1 324 657 980TEXT STTL INDEX HOLDPROGRAMMEREC VCR DVDRETURNEXITMENUOKOPTIONMENU34Set to “On”(default is On)Select “Setup”Select “VIERA Link”213Display the menuEnjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 2” function.Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,Amplifier, etc.) with HDMI cables allow you to interface them automatically.The equipment with “HDAVI Control” function enables the following operations:• Easy playback (p. 35)• Power on link (p. 35)• Power off link (p. 35)• Speaker control (p. 35)In addition, the equipment with “HDAVI Control 2” function enables the following operation:• Easy control only with VIERA remote control (p. 35)These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industrystandard known as HDMI CEC (Consumer Electronics Control), is a unique function that we havedeveloped and added. As such, its operation with other manufacturers’ equipment that supports HDMICEC cannot be guaranteed.Refer to individual manuals for compatibility information. About applicable equipment, consult your localPanasonic dealer.VIERA Link “ ControlTM”4HDMI FunctionsŶHDMI cableThis function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.It is recommended that you use Panasonic’s HDMI cable. Recommended part number:• RP-CDHG15 (1.5 m)• RP-CDHG30 (3.0 m)• RP-CDHG50 (5.0 m)ŶPreparationsSetup the equipment to enable this function. Read the manuals of the equipment.About connections, see “External Equipment” (p. 37). Read the manuals of the equipment too.ŶFor the first time / When adding new equipment, reconnecting equipment or changing setupAfter connection turn the equipment on and then switch the TV on.Select the input mode to HDMI1 or HDMI2 (p. 14), and make sure that an image is displayedcorrectly.Main MenuVIERA LinkPictureSoundSetupsetaccessselectselect