Panasonic Viera TX-26LXD70 Operating Instructions Manual

Panasonic Viera TX-26LXD70 Operating Instructions Manual Manual pdf 40 page image

40Setup Menu 2/2Preferred Subtitles EnglishShipping ConditionOwner IDCommon InterfaceSystem UpdateInput LabelsBanner Display Timeout 3 secondsVIERA LinkSoftware LicenceOnGUIDEINPUTASPECT DIRECT TV RECVCR1 324 657 980TEXT STTL INDEX HOLDPROGRAMMEREC VCR DVDRETURNEXITMENUOKOPTIONMENUSet to “On”(default is On)Select “Setup”Select “VIERA Link”213Display the menuEnjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 2” function.Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,Amplifier, etc.) with HDMI cables allow you to interface them automatically.The equipment with “HDAVI Control” function enables the following operations:• Easy playback (p. 41)• Power on link (p. 41)• Power off link (p. 41)• Speaker control (p. 41)In addition, the equipment with “HDAVI Control 2” function enables the following operation:• Access and control the connected equipment by VIERA remote control (p. 41)These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industrystandard known as HDMI CEC (Consumer Electronics Control), is a unique function that we havedeveloped and added. As such, its operation with other manufacturers’ equipment that supports HDMICEC cannot be guaranteed.Refer to individual manuals for compatibility information. About applicable equipment, consult your localPanasonic dealer or refer to the URL: www.panasonic.co.ukVIERA Link “ ControlTM”4HDMI FunctionsŶHDMI cableThis function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.It is recommended that you use Panasonic’s HDMI cable. Recommended part number:• RP-CDHG15 (1.5 m)• RP-CDHG30 (3.0 m)• RP-CDHG50 (5.0 m)setŶPreparationsSetup the equipment to enable this function. Read the manuals of the equipment.About connections, see “External Equipment” (p. 43). Read the manuals of the equipment too.ŶFor the first time / When adding new equipment, reconnecting equipment or changing setupAfter connection turn the equipment on and then switch the TV on.Select the input mode to HDMI1 or HDMI2 (p. 16), and make sure that an image is displayedcorrectly.Main MenuVIERA LinkPictureSoundSetupaccessselectselect