44 45FAQs, etc.Problem ActionsOtherTV takes so long toturn on • Like your computer, the TV has to run a number ofdiagnostic and software checks before it can display anybroadcast channels.The channel cannotbe changed • Is the TV in Teletext mode? (p. 16)The channel cannotbe selected • Is the channel locked? (p. 24)The remote controldoes not work • Are the batteries installed correctly? (p. 6)• Has the TV been switched On?TV goes into"Standby mode" • The sleep function is activated.• The TV enters "Standby mode" about 30 min. afterbroadcasting ends.An error messageappears • Follow the message's instructions.• If the problem persists, contact the authorizedService Centre.The LCD panel movesslightly when it ispushed with a fi ngerClattered sound mightbe heard• There are some looseness around the panel to preventthe damage to the panel.The panel might move slightly when it is pushed with afinger, and clattered sound might be heard. This is not amalfunction.FAQs SD Card: On screen messagesMessage Meaning / ActionCautions in handling SD Card :• Do not remove the card while the TV is accessing data ("blue" LEDOn) (this can damage card or TV).• Do not touch the pins on the back of the card.• Do not subject the card to a high pressure or impact.• Insert the card in the correct direction (otherwise, card may bedamaged).• Electrical interference, static electricity, or erroneous operation maydamage the data or card.• Back up the recorded data at regular intervals in case of deterioratedor damaged data or erratic operation of the TV. (Panasonic is notliable for any deterioration or damage of recorded data.)WARNING: As with an small object,SD card can be swallowed by youngchildren. Do not allow children tohandle SD card. Please remove SD cardimmediately after use.Is SD Card in?• Insert a SD card.SD Card is lockedPlease unlock to operate • Unlock the SD card.This file is lockedPlease unlock to operate • Unlock the file in the card.This type of format is notsupported • The TV does not support the format.(For the applicable formats and data, see p. 40.)This type of card is notsupported • A card not supported by the TV has been inserted.(For the supported cards, see p. 40.)Broken fileCannot display image • The file is broken.Memory full• The card memory is full.Not enough memory• The card does not have enough memory to operate.Cannot read file• The file is not readable.Unrecordable sourceSD recording is stopped • That channel cannot be recorded. (Recording is automaticallystopped.)ErrorCheck card • Re-insert the card. If the error persists, format the card. (p. 31)Card recording in progressPlease stop recording to operate • That operation is not available during recording.To continue the operation, stop recording.( For example, changing channels while recording a TVprogramme. )Delete file? • Displayed when you press Red colour button to delete aMPEG4 file. Press OK button to confirm deleting.Blue LEDNo time dataCannot store time info • Since the signal does not have the time information, the date isrecorded as 01/01/2000.• SD Card: On screen messages• Frequently Asked Questions