Panasonic Viera TX-26LM70FA Operating Instructions Manual

Also see for TX-26LM70PA: Service manual Service manual

Contents

Panasonic Viera TX-26LM70FA Operating Instructions Manual Manual pdf 15 page image

Advanced15• How to Use Menu Functions(picture, sound quality, etc.)Adjustments / Configurations (alternatives)Basic picture mode (Dynamic / Normal / Cinema)• Set for each input signal Viewing mode DynamicAdjusts backlight, colour, brightness, etc. for each picture mode to suit your taste ContrastBrightnessColourSharpnessBacklightAdjusts tint of image• For NTSC signal reception only TintChooses the colour balance of the entire image (Cool / Normal / Warm) Colour balance NormalAutomatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)• Not valid on HDMI, and HD signal P-NR AutoAutomatically makes still pictures and slow pictures look more vivid (Off / On)• For PAL or NTSC signal reception only• Not valid on RGB, S-Video, components and HDMIAdjusts the output level of deep bass (High Low) BassAdjusts the output level of high-pitch, shrill sound (High Low) TrebleAdjusts volume level of right and left speakers BalanceAdjusts the volume of the headphones (High Low) Headphone volumeSelect stereo / monaural (Mono / Stereo)• Normally: Stereo• Stereo signal cannot be received: Mono• M1 / M2: Available while mono signal is transmittedMPX StereoImproves sound quality for music and dramas (Music / Speech) Mode MusicGives a greater spatial effect by using dynamic enhancer (Off / On) Ambience OffChooses according to the signal when HDMI is connected(Auto / Digital / Analogue) (p. 25)• HDMI2 terminal is for digital signal onlyHDMI1 input AutoVIERA Link function (Off / On) (p. 19) VIERA Link OnChooses the connector to which a Q-Link compatible equipment is connected(Off / AV1 / AV2) (p. 22) Q-Link AV2Chooses the signal to be transmitted from the TV to Q-Link (TV / AV2 / AV3 / Monitor)• Monitor: Image displayed on screen• Component signals cannot be outputtedAV1 out MonitorChooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV3 / Monitor)• Monitor: Image displayed on screen• Component signals cannot be outputtedAV2 out MonitorTeletext display mode (TOP (FLOF) / List) (p. 12) Teletext TOPSets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Off timer OffSelects teletext language (West / East1 / East2)• West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish• East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian• East2: Czech, Hungarian, Lettish, Polish, RumanianText language WestEdits channels (p. 16) Programme edit AccessSets channels automatically (p. 16) AccessAuto setupSets channels manually (p. 16) Manual tuning AccessFine tuning of channels (during rain, etc.) Fine tuningSelects optional colour system depending on video signals (Auto / PAL / SECAM / M.NTSC) Colour system AutoAdjusts volume of individual stations Volume correctionChanges language for on-screen displays OSD language AccessSelects optional colour system based on video signals in AV mode Colour system AutoAdjusts volume for AV and HDMI mode Volume correction• In AV mode, the Sound menu and Setup menu give a smaller number of options.3D-COMB On