Panasonic Viera TH-P54Z10H Operating Instructions Manual

Panasonic Viera TH-P54Z10H Operating Instructions Manual Manual pdf 60 page image

60FAQsDue to the digital reception technologies involved, quality of the Digital TV signals may be relatively low insome cases, despite good reception of Analogue TV channels.●Unable to receive signalswith a high-performanceaerial• Install an aerial individually for the TV and VCR(or use a splitter).TVVCR(Individual aerial)(Individual aerial)AerialInputterminalSplitterAerial OutputAerial InputAerial OutputInterference orfrozen / disappearingimage in Digital TVCheck “Digital TV Signal Condition”. (p. 37)If “Signal Quality” or “Signal Strength” are displayed in red, check aerial.If problem persists, consult your local Panasonic dealer.Turn the TV off with the Mains power On / Off switch, then turn itOn again.Remove the mains plug of the tuner box from the wall socket andconnect it again to turn it on.●●●TV goes into “Standby mode” Off Timer function is activated.The TV enters “Standby mode” about 30 mins. after analoguebroadcasting ends.●●The remote control does notwork or is intermittentAre the batteries installed correctly? (p. 8)Has the TV been switched On?Has the remote control been registered? (p. 41)The batteries may be running low. Replace them.Use the remote control within the range of 7 m from the tuner box.Keep the remote control away from the devices such as wirelessLAN, microwaves, mobile phones or other electric equipment toavoid wave interference.●●●●●●Cannot operate the TV Turn the display unit and the tuner box off, and then on again.●Parts of the display unit or thetuner box become hotThe temperature rises will not cause any problems in terms ofperformance or quality.●Other Digital TVProblem Actions