Using Network Services51Network settings for the Wireless LAN connectionThis setting is for the network connection by using a Wireless LAN Adaptor.• Confirm the encryption key, settings and positions of your access point before starting setup.For details, read the manual of the access point.1 Select [Network Type] and set to [Wireless]Network TypeConnection TestAccess Point SettingsIP/DNS SettingsMAC AddressNetwork SetupWireless12-34-56-78-9a-bcSoftware UpdateAccesssetselect2 Select [Access Point Settings]Network TypeConnection TestAccess Point SettingsIP/DNS SettingsMAC AddressNetwork SetupWireless12-34-56-78-9a-bcSoftware UpdateAccess accessselect3 Select the connection type and setPlease select network connection type.WPS(Push button)WPS(PIN)ManualConnection TypeSearch for access pointaccessselectWPS(Push button) (p. 13)WPS(PIN) : Sets by entering the PIN code to the access pointSearch for access point (p. 13)Manual : Sets manually by entering the SSID of access pointFollow the on screen instructions4 Select [Connection Test] and access to testNetwork TypeConnection TestAccess Point SettingsIP/DNS SettingsMAC AddressNetwork SetupWireless12-34-56-78-9a-bcSoftware UpdateAccessAccessaccessselectPerforms automatic testing of the network connection for the TV.(It takes a while to test.)Check access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test: succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections, and then perform thisfunction again.If you continue to have difficulty, please contact your internetservice provider.Update TV’s softwareAccesses the specific web site to update TV’s software and search if any software updates are available.Network TypeConnection TestAccess Point SettingsIP/DNS SettingsMAC AddressAccessNetwork SetupWired12-34-56-78-9a-bcSoftware Updateaccessselect [Software Update]• Follow the on screen instructionsNoteNetwork TypeConnection TestAccess Point SettingsIP/DNS SettingsMAC AddressNetwork SetupWired12-34-56-78-9a-bcSoftware Update[MAC Address]• MAC address is a unique address that identifies hardware in thenetwork.(for information only)