Panasonic Viera TH-P50X30Z Operating Instructions Manual

Panasonic Viera TH-P50X30Z Operating Instructions Manual Manual pdf 29 page image

How to Use the Menu Functions28Main MenuPictureSoundSetupItem Adjustments / Configurations (alternatives)PC SetupInput ResolutionSwitches to a wide view• VGA (640 × 480 pixels), WVGA (852 × 480 pixels),XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)• Options change depending on signalsClock Set to the minimum level if noise occurs.H-posAdjusts horizontal positionV-posAdjusts vertical positionClock PhaseEliminates flicker and distortion• Adjust after Clock adjustment• Set to the minimum level if noise occursSync• H & V• SOGPC sync signal type[H & V]: by the horizontal and vertical signals from your PC[SOG]: Sync on Green sync from your PCReset PC Settings Press the OK button to reset the PC Setup settings to the default.DVI PositionSettings H-pos Adjusts horizontal position settings of DVIV-pos Adjusts vertical position settings of DVIReset DVI PositionSettings Press the OK button to reset the DVI Position Settings to the default.Off Timer• Off• 15 / 30 / 45 / 60 / 75 /90 minutesSets the time until the TV automatically goes to Standby modeEco NavigationAutomatically sets the TV to the most suitable energy-saving mode• If you press the OK button, the following items are set as below:[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],[Power Save] [On][Intelligent Auto Standby] [On (No reminder)][Auto Standby] [2 hours]Child Lock Locks a channel / AV input to prevent access to it (p. 34)Tuning MenuFavourites Edit Creates a list of favourite channels (Digital TV mode) (p. 31)Channel List Skips the unwanted channels or edits channels (p. 31, 33)Auto Tuning Sets all Digital TV or Analogue TV channels automatically (p. 32, 33)Manual Tuning Sets the TV channels manually (p. 32, 33)Update Channel List Updates the channel list while keeping your settings (Digital TV mode) (p. 32)Signal Condition Checks the Digital TV signal condition (p. 32)Add TV SignalAdds the TV mode• This function is available if you skip any modes to tune in [Auto Tuning]for first using the TV.• To operate, refer to the [Auto Tuning] operations for first using the TV (p. 12).