Panasonic Viera TH-P50X30Z Operating Instructions Manual

Panasonic Viera TH-P50X30Z Operating Instructions Manual Manual pdf 26 page image

How to Use the Menu Functions25Advanced SettingsWhite Balance∗1R-Gain Adjusts the white balance of bright red areaG-Gain Adjusts the white balance of bright green areaB-Gain Adjusts the white balance of bright blue areaR-Cutoff Adjusts the white balance of dark red areaG-Cutoff Adjusts the white balance of dark green areaB-Cutoff Adjusts the white balance of dark blue areaReset WhiteBalance Press the OK button to reset to the default White BalanceGamma∗1 Gamma• S Curve /1.8 / 2.0 / 2.2/ 2.4 / 2.6Switches the gamma curve• Please note the numerical values are reference for the adjustment.Reset Gamma Press the OK button to reset to the default GammaRefresh Rate• 50 Hz• 100 HzChanges the image processing of the panel(depending on the input signal)• Set to [100Hz] normallySide Panel• Off• Low• Mid• HighIncreases the brightness of the side panel• The recommended setting is [High] to prevent panel “image retention”.16:9 Overscan• Off• On[On]: Default - Image is overscanned by ~5% beyond the edge of thescreen to hide edge video noise[Off]: Displays image in its original size including edge video noise suchas lines, dashes, dots etc.• Applicable for video signals when TV aspect is set to [16:9]• Memorised separately for SD and HD channels / signalsDVI Input Setting• Normal• FullChanges the black level in the image for HDMI input mode with DVI inputsignal manually• When the DVI input signal from the external equipment, especially from PC,is displayed, the black level may not be suitable. In this case, select [Full].• The black level for HDMI input signal will be adjusted automatically.• For HDMI input mode with DVI input signal only.Pixel Orbiter• Auto• OnSelects the mode for wobbling of the image to prevent panel “imageretention”[Auto]: Automatically works only for the appropriate images and yourarely recognise the wobbling.Scrolling BarScrolls the vertical bar to prevent panel “image retention”• Press the OK button to start scrolling and press any buttons (exceptStandby) to exit this mode.Reset Picture Defaults Press the OK button to reset settings of Picture Viewing Mode to thedefault.∗1 : PC input mode only