Panasonic Viera TH-P50V10Z Operating Instructions Manual

Panasonic Viera TH-P50V10Z Operating Instructions Manual Manual pdf 8 page image

Accessories / Options Quick StartGuide7Attaching the pedestalWarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.●CautionDo not use any other TV and displays.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearestPanasonic dealer immediately.During set-up, make sure that all screws are securely tightened.If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not bestrong enough to support the TV, and it might fall over and become damaged, and personal injury may result.Ensure that the TV does not fall over.If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.Two or more people are required to install and remove the TV.If two or more people are not present, the TV may be dropped, and personal injury may result.●●●●●Assembly screw (4)(silver)XYN5+F18FN●Assembly screw (4)(black)THEL060N●Pole (2)L:TBLA3680R:TBLA3679● BaseTBLX0123●M5 × 18 M5 × 25L RAssembling the pedestalUse the four assembly screws to fasten the left andright poles to the base securely.Make sure that the screws are securely tightened.Forcing the assembly screws the wrong way will stripthe threads.“L” or “R” mark is stamped on the bottom of the pole.●●● ARDLFrontSecuring the TVUse the assembly screws to fasten securely.Make sure that the screws are securely tightened.Carry out the work on a horizontal and level surface.●●DBArrow markView from the bottomHole for pedestalinstallationAdjust the panel to your desired angle• Ensure that the pedestal does not hang over the edgeof the base even if the TV swivels to the full rotationrange.• Do not place any objects or hands within the fullrotation range.(View from the top)Set the mark at the centre as illustrated, tohave the swivel positioned at the centre of therotation angle.10°10°406 mm510 mm