22A B A B A BB A B A B APC1VIDEO2PC1VIDEO2VIDEO2VIDEO1PC1VIDEO2AAACBBBDMULTI PIP MULTI PIPSWAP SWAPSELECTSWAPMULTI PIPMULTI PIPPress repeatedly.Each time pressing this button main picture and sub picture will be displayedas follows below.Press to swap mainpicture and sub picture.Press to select the input mode.Under main Picture and sub picture display, select thepicture which you would like to change input modes.Notes:• The sub picture sound is heard while a sub pictureoperation is underway.• The sub picture operation automatically returns tothe main picture operation if a sub picture operationhas not been performed for about 5 seconds or ifany of the remote control buttons is pressed (exceptbutton).Press to move the sub picture.Each time the location of the sub picture will be moved.Notes:• This button is effective only in the picture in picture.• The sub picture may be hidden by the on screen display, depending on its position.Notes:• Sound output is from the picture which is selected in Audio OUT(PIP) (See page 26).• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of thepictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayedon the main picture and depending on the 2-picture display mode.• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.• Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on themsatisfactorily.• Following combinations of two analog signals cannot be displayed simultaneously;Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)• Following signals are not applicable to this menu.1125 / 50p • 60p, 1152 × 864 @60 Hz, 1400 × 1050 @60 Hz, 1600 × 1200 @60Hz, 1920 × 1200 @60 HzPress to change input signal.[Picture out Picture]Main picture Sub picture[Picture and Picture] [Picture in Picture][Example]Input modes switching is possibleMain picture label is bright Sub picture label is brightPicture is changedMain picture label is changed Sub picture label is changedMain picture Sub picture Main picture Sub pictureNormalViewing