AdvancedMenu Item Adjustments / Configurations (options)PictureAdvancedPCSettingsW/B High R White balance of bright red areaandrepeatedly adjustedW/B High B White balance of bright blue areaW/B Low R White balance of dark red areaW/B Low B White balance of dark blue areaGamma (S Curve / 2.0 / 2.2 / 2.5)Reset toDefault Press the OK button to reset to the default Picture settingsSetupPCSetupInputResolutionSwitches to a wide view• VGA (640 × 480 pixels), WVGA (852 × 480 pixels),XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)• Options change depending on signalsClock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock Phase Eliminates fl icker and distortion• Adjust after Clock adjustment • Set to the minimum level if noise occursSync Chooses another synchronous signal if the image is distorted (H & V / On G)• H & V : by the horizontal and vertical signals from your PCOn G : by the green signal from your PC (if available)Reset toDefault Press the OK button to reset to the default Setup settings• Other items p. 24 - 27OPTION SD CARDEXITRETURNINPUTInput SelectionAV1AV2/SAV3/SCOMPONENTPCHDMI1HDMI4HDMI3HDMI2TV37• Displaying PC Screen on TV• Input LabelsDisplaying PC Screen on TVŶTo return to TVSelect the external inputSelect “PC”2The screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.• To connect PC p. 46• Corresponding signals p. 51• If “H-freq.” or “V-freq.” is shown in red,the signals may not be supported.ŶPC menu setting (changed as desired)• To make settings “How to Use Menu Functions” to (p. 22)1accessselect