Panasonic Viera TH-42PZ800B Operating Instructions Manual

Also see for Viera TH-42PZ800B: Specifications

Panasonic Viera TH-42PZ800B Operating Instructions Manual Manual pdf 26 page image

26■Menu listMenu Item Adjustments / Configurations (alternatives)VIERA LinkPause Live TV Controls the connected equipment with VIERA Link function, and enables variousconvenient recording, playback, etc. (p. 47 - 49)• You can also access VIERA Link Menu directly using the VIERA Link button on theremote control.Direct TV RecVIERA Link ControlSpeaker SelectionPictureViewing ModeSelects four different screen settings (Dynamic / Normal / Cinema / Eco)Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright roomNormal : Recommended for viewing under normal ambient room lighting conditionsCinema : For watching movies in a darkened room producing a cinema-like pictureEco : Adjusts picture settings automatically dependent on ambient lighting conditionsIn each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance,Colour Management and 3D-COMB can be adjusted and stored to suit your particular viewingrequirement (e.g., you may require different settings for viewing sports, films, news etc.)• Set for each input signal • Changes will be stored automaticallyContrast, Brightness,Colour, Sharpness Increases or decreases the levels of these options according to your personal preferenceTint With an NTSC signal source connected to the TV, the picture hue can be adjusted tosuit your taste • For NTSC signal reception onlyColour Balance Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)Colour Management Automatically adjusts colours to vivid ones (Off / On) • Not valid on PC signalDigital Cinema ColourDisplays the vivid images with the expanded colour gamut (Off / On)Set to “On” if pictures contain Digital Cinema Colour signals, set to “Off” if they do notcontain Digital Cinema Colour signalsPictures containing Digital Cinema Colour signals can be, for example, created by anHD Video Camera• Only available in HDMI input mode and SD Card Movie View Mode (p. 43)P-NR Picture Noise ReductionAutomatically reduces unwanted picture noise and flicker noise in the contoured parts ofa picture (Off / Min / Mid / Max) • Not valid on PC signal3D-COMBOccasionally, whilst viewing still or slow moving pictures, colour patterning may be seenSet to “On” to display sharper and more accurate colours (Off / On)• For PAL or NTSC signal reception only• Not valid on RGB, S-Video, Component, PC, HDMI and SD CardReset to Default Press the OK button to reset the present Picture Mode to the default settingsSoundModeSelect two different sound settings (Music / Speech)In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit yourparticular sound requirementChanges to any settings in a mode will affect all signal sourcesSound quality can be improvedBass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputBalance Adjusts volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings (Off / Simulated Surround / SRS TruSurround XT)Simulated Surround: Provides a dynamic enhancer to simulate improved spatial effectsSRS TruSurround XT : SRS TruSurround XT ® creates a high quality surround sound effect using justtwo speakers from the source which can output surround encoded signals• Switching is also possible by the Surround button on the remote control (p. 9).Volume Correction Adjusts volume of individual programme or input modeSpeaker Distanceto WallAdjusts the low frequency sound (Over 30cm / Up to 30cm)• If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.• If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.Preferred Multi Audio Selects the preferred language for DVB multi audio (depending on the broadcaster)NICAMNICAM (Near Instantaneous Companded Audio Multiplex)A format for digital sound over televisionReproduces stereo sound (Off / On)• Off if reception is poor (FM monaural sound) • Analogue mode onlyHDMI1 / 4 InputSelect to fit the input signal (Auto / Digital / Analogue) (p. 52)Auto : Automatic detection of digital or analogue sound sourceDigital : HDMI cable connectionAnalogue : HDMI-DVI adapter cable connection• HDMI input mode only• HDMI2 / 3 terminals are for digital signal only • No setting for HDMI2 / 3 availableAudioDescriptionMenuAudio Description Useful for visually-impaired viewers (Off / On)Select “On” to activate the description sound track if availableVolume Adjusts the volume for audio descriptionSpeakers Set to “On” to activate the description sound track from TV speakers (Off / On)Headphones Set to “On” to activate the description sound track from headphones (Off / On)Reset to Default Press the OK button to reset the present Sound Mode to the default settings• Effective to Bass, Treble, Balance, Headphone Volume and SurroundHow to Use Menu Functions