Panasonic Viera TC-P50GT30 Owner's Manual

Also see for VIERA TC-P50GT30: Owner's manual Specification sheet User guide Owner's manual Service manual

Contents

Panasonic Viera TC-P50GT30 Owner's Manual Manual pdf 50 page image

50Settings Items Item Description• Some menus are grayed out depending on the input signal or condition.(e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.)AspectadjustmentsScreen format FULL/H-FILL/JUST/4:3/ZOOMChanges the format (aspect ratio).Lets you choose the aspect depending on the format ofreceived signal. (p. 55)HD size Size 1/Size 2 Selects between 95 % (Size 1) or 100 % (Size 2) for thescanning area with High-definition signal.Select “Size 1” if noise is generated on the edges of the screen.● Size 1: Selected item for “HD size”. Scanning 95 %● Size 2: Selected item for “HD size”. Scanning 100 %H size Size 1/Size 2 Adjusts the horizontal display range to reduce noise of both sideedges of an image.Size 2: Adjusts the image size according to the aspect mode toreduce noise. (p. 55)ZoomadjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”.PC adjustments Reset to defaults Resets PC adjustments.Sync H & V The H and V sync signals are input from the HD/VD connector. (p. 58)On green Uses a synchronized signal on the Video G signal, which isinput from the G connector. (p. 58)Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.H-position Adjusts the horizontal position.V-position Adjusts the vertical position.Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred.First adjust the Dot Clock to get the best possible picture, then adjust the clock Phaseso that a clear picture appears.● It may not be possible to display a clear picture due to poor input signals.InputresolutionSwitches to wide display.● VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),WXGA (1,280×768 pixels)● Options change depending on signalsH-frequencyV-frequencyDisplays the H (Horizontal)/V (Vertical) frequencies.Display rangeHorizontal:15 - 110 kHzVertical: 48 - 120 HzHDMI settings HDMI/DVI RGBrange (HDMI 1-4)Auto/Standard(16-235)/NonstandardPrevents the blown out highlights and blocked up shadows whena wide-range signal is received. Selects between standard RGBrange (16-235 bits) or non-compliance (0-255 bits).Auto: Switches the RGB range (Standard (16-235)/Nonstandard) depending on the HDMI signal information.Contents type(HDMI 1-4)Off/Auto/Photo/GraphicsSets content type to each HDMI input.Auto: Switches content type automatically depending on theHDMI signal information.Photo: Best setting for JPEG viewing.Graphics: Best setting for On-Screen display of connectedequipment.