8AccessoriesAssembly screws(4 of each)AM5 x 15BM4 × 12Bracket (1)Base (1)LocationPlace the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) willfall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilationis essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.Adjust the LCD panelto your desired angle.b15°15°a(View from above)TC-L37D2Xa: 15.8 ” (399 mm)b: 11.1 ”(280 mm)TC-L42D2Xa: 17.8 ” (450 mm)b: 12.2 ” (309 mm)NoteEnsure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.Do not place any objects or hands within the full rotation range.WARNINGDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any other TV and displays.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.Reference of connectionAntenna terminal Pin terminals HDMI terminalgreenblueredgreenFirmly tighten by hand. Match colors of plugs and terminals.Insert firmly.Insert firmly.Attaching the pedestal to TV■Assembling the pedestal ■Set-upFix securely with assemblyscrews A . (Total 4 screws)Tighten screws firmly.Fix securely with assemblyscrews . (Total 4 screws)Tighten screws firmly.(Image: TBLX0165)ABracketFrontBaseBBFoam mat or thicksoft cloth