Panasonic Viera TC-L42D2X Operating Instructions Manual

Also see for Viera TC-L42D2X: Operating instructions

Contents

Panasonic Viera TC-L42D2X Operating Instructions Manual Manual pdf 13 page image

13Quick StartGuide First Time SetupPress to return tothe previous screenAuto channel setup (ANT/Cable setup)Select the connected Antenna in terminalANT/Cable setup Step 3 of 6Cable Antenna Not usedANTENNACable InANTENNACable InSelect “Not used” when viewing TV viaSatellite receiver or Cable box. Note: Select“Cable” when viewing via Cable DTA Box.OKRETURNSelectselectOKNot used: Go to(Label inputs)Select “Not used” when no wire is connected to the “Antenna/Cable” terminal.Typical when a Cable/Satellite box is connected to a TV input.Prevents accidental tuning to an unavailable signal.Select “Start”Auto program Step 4 of 6Start SkipStart scanning for channels via the TV’sbuilt-in tuner. Select “Skip” when viewing TVchannels via Satellite receiver or Cable box.OKRETURNSelectselectOKSkip: Go to(Label inputs)Start scanning the channels(Available channels are automatically set.)Auto programProgressNumber of analog channelsNumber of digital channelsPress RETURN to quit8%100RETURNComplete the Auto program setupCompletion message is displayed when the Auto program scan is successfullycompleted.Auto programAuto program completed.Press OK to continue.Number of analog channelsNumber of digital channels100OKRETURNOKIf there is no availablechannel, return to -(ANT/ Cable setup).“Not used” will be selected.Operation of the EXIT button during “First time setup”Press the button once to display confirmation screen. Press again to closeconfirmation screen.[EXIT confirmation screen]Are you sure you want to exit the First Time Setup?To repeat the First Time Setup, select“First time setup” in the Setup Menu.Yes NoYes Exit “First time setup”No Return to the original screen.