Panasonic Viera TC-L37U3 Owner's Manual

Also see for TCL32U3 - 32" LCD TV: Service hints Owner's manual Service manual Owner's manual

Panasonic Viera TC-L37U3 Owner's Manual Manual pdf 31 page image

31AdvancedHow to Use Menu Functions● “Reset to default” will be grayed out if no changes are made in the following menus:“Picture”, “PC adjustments”, “Audio” and “Closed caption”.Picture settings Adjust the image or picture qualitySettings Items Item DescriptionReset to defaults Resets all picture adjustments to factory default settings except for “Advanced picture”.Picture mode Vivid Provides enhanced picture contrast and sharpness for viewing in a well-lit room.Standard Recommended for normal viewing conditions with subdued room lighting.Cinema For watching movies in a darkened room. It provides a soft, film-like picture.Game For playing video games.Custom (Photo) Customizes each item according to your taste.Photo is displayed in JPEG menu.Back light Adjusts the luminance of the back light.Contrast,Brightness, Color,Tint, SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste• Display range Contrast/Brightness/Color/Sharpness : 0 - 100Tint : -50 - +50Color temp. Cool/Normal/Warm Selects a choice of Cool (blue), Normal, or Warm (red) color.A.I. picture Off/On Controls dark areas without affecting the black level or brightness in the overall picture.C.A.T.S. Off/On Automatically adjusts the screen brightness according to the ambient lighting condition.Video NR Off/On Reduces noise, commonly called snow. Leave it off when receiving a strong signal.• Some menus are grayed out depending on the input signal or condition.(e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.)AspectadjustmentsScreen format JUST/4:3/ZOOM/FULL/H-FILLChanges the format (aspect ratio).Lets you choose the aspect depending on the format ofreceived signal. (p. 36)HD size Size 1/Size 2 Selects between 95 % (Size 1) or 100 % (Size 2) for thescanning area with High-definition signal.Select “Size 1” if noise is generated on the edges of the screen.• Size 1: Selected item for “HD size”. Scanning 95 %• Size 2: Selected item for “HD size”. Scanning 100 %H size Size 1/Size 2 Adjusts the horizontal display range to reduce noise of both sideedges of an image.Size 2: Adjusts the image size according to the aspect mode toreduce noise. (p. 36)ZoomadjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”.PC adjustments Reset to defaults Resets PC adjustments.Sync H & V The H and V sync signals are input from the HD/VD connector. (p. 39)On green Uses a synchronized signal on the Video G signal, which isinput from the G connector. (p. 39)Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially oris blurred.H-position Adjusts the horizontal position.V-position Adjusts the vertical position.Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred.First adjust the Dot Clock to get the best possible picture, then adjust the clock Phaseso that a clear picture appears.● It may not be possible to display a clear picture due to poor input signals.InputresolutionSwitches to wide display.● VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels), WXGA(1,280×768 pixels)● Options change depending on signalsH-frequencyV-frequencyDisplays the H (Horizontal)/V (Vertical) frequencies.Display rangeHorizontal:15 - 110 kHzVertical: 48 - 120 Hz