Technical Information® For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;characters might be cut off).® The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set Onusing the Component or HDMI connection to the TV.® If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CCmay overlap on the TV.® If a digital program is being output in analog format, the CC data will also be output in analog format.® If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the formatof the received signal and your preference. (p. 16)(e.g.: in case of 4:3 image)® FULL ® JUSTI_ 4 _t I_ 4 _1I_ 16_1!Enlarges the 4:3 image horizontally to the screen's side edges. Stretches to justify the 4:3 image to the four corners of the(Recommended for anamorphic picture) screen.® H-FILLI_ 4 _1 I_16_1Enlarges the 4:3 image horizontally to the screen's sideedges. The side edges of the image are cut off.® ZOOMI_ 4 _1 1_16_1Enlarges the 4:3 image to the entire screen.(Recommended for letter Box)(Recommended for normal TV broadcast)® 4:3t_ 4 _1[Standardbar(Note that "Image retention" of the side bar may occur fromdisplaying it for a long time.)® 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):FULL, JUST, 4:3 or ZOOM® 1080p ! 1080i ! 720p:FULL, H-FILL, JUST, 4:3 or ZOOM® Zoom adjustmentsVertical image position and size can be adjusted in "ZOOM".(_0Select "Zoom adjustments" on the "Picture" menu. (p. 28)@ V-position: Vertical position adjustment _3)V-size: Vertical size adjustment@@-1 -I_r'-_r--Noo5"® To reset the aspect ratio ÷ (OK)45