Panasonic Viera TC-50AS650UE Owner's Manual

Also see for TC-55AS650U: Ehelp Service manual

Contents

Panasonic Viera TC-50AS650UE Owner's Manual Manual pdf 23 page image

23EnglishCare and CleaningFirst, unplug the power cord plug fromthe wall outlet.Display panelThe front of the display panel has been specially treated.Wipe the panel surface gently using only a cleaningcloth or a soft, lint-free cloth.● If the surface is particularly dirty after cleaning up thedust, soak a soft, lint-free cloth in diluted, mild liquiddish soap (1 part mild liquid dish soap diluted by100 times the amount of water), and then wring thecloth to remove excess liquid. Use this cloth to wipethe surface of the display panel, then wipe it evenlywith a dry cloth of the same type until the surface isdry.● Do not scratch or hit the surface of the panel withfingernails or other hard objects. Furthermore, avoidcontact with volatile substances such as insectsprays, solvents, and thinner; otherwise, the quality ofthe surface may be adversely affected.CabinetIf the cabinet becomes dirty, wipe it with a soft, dry cloth.● If the cabinet is particularly dirty, soak the cloth indiluted, mild liquid dish soap and then wring the clothdry. Use this cloth to wipe the cabinet and then wipe itdry with a dry cloth.● Do not allow any mild liquid dish soap to come intodirect contact with the surface of the TV. If waterdroplets get inside the unit, operating problems mayresult.● Avoid contact with volatile substances such as insectsprays, solvents, and thinner; otherwise, the quality ofthe cabinet surface may be adversely affected or thecoating may peel off.● Do not let articles made from rubber or PVC be incontact with the TV for long periods of time.PedestalCleaning● Wipe the surfaces with a soft, dry cloth. If the unit isparticularly dirty, clean it using a cloth soaked withwater to which a small amount of mild liquid dishsoap has been added and then wipe with a dry cloth.Do not use products such as solvents, thinner, orhousehold wax for cleaning, as they can damage thesurface coating.Note: If using a chemically-treated cloth, follow theinstructions supplied with the cloth.● Do not attach sticky tape or labels, as they can makethe surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like.(Doing so will cause deterioration.)Power cord plugWipe the plug with a dry cloth at regular intervals.Note: Moisture and dust can lead to fire or electricalshock.3D Eyewear● Clean using a soft, dry cloth.● Wiping the 3D Eyewear with a soft cloth that iscovered in dust or dirt may scratch the eyewear.Shake off any dust from the cloth before use.● Do not use benzene, thinner, or wax on the 3DEyewear, as doing so may cause the paint to peel off.● Avoid storing the 3D Eyewear in hot or highly humidlocations.