Panasonic Viera TC-26LE70 Operating Instructions Manual

Also see for TC32LE70 - LCD TV: Operating instructions Operating instructions

Panasonic Viera TC-26LE70 Operating Instructions Manual Manual pdf 39 page image

39FAQs, etc.Technical InformationRatings List for LockTechnical InformationClosed Caption (CC)Aspect RatioLets you choose the aspect depending on the format of the received signal and your preference. (p. 19)(e.g.: in case of 4:3 image)• For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL.(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)• The Closed Caption is not displayed when you use HDMI connection.• If analog connected equipment is used for displaying or recording, Closed Caption (CC) should be set On/Off onthe connected equipment.The CC mode setting of the TV will not affect the analog input.If a digital program is being output in analog format, the CC data will also be output in analog format.If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV.If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.• FULL • JUSTFULL JUSTEnlarges the 4:3 image horizontally to the screen’s side edges.(Recommended for anamorphic picture) Stretches to justify the 4:3 image to the four corners of thescreen.(Recommended for normal TV broadcast)• H-FILL • 4:3H-FILLEnlarges the 4:3 image horizontally to the screen’s side edges.The side edges of the image are cut off. Standard• ZOOMZOOMEnlarges the 4:3 image to the entire screen.(Recommended for Letter Box)• Zoom adjustVertical image position and size can be adjusted in “ZOOM”.Select “Zoom adjust” on the “Picture” menu. (p. 22-23)V-position: Vertical position adjustment V-size: Vertical size adjustmentSide bar• To reset the aspect ratio (OK)Note• 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):FULL, JUST, 4:3 or ZOOM• 1080p / 1080i / 720p:FULL, H-FILL, JUST, 4:3 or ZOOM• When the signal is 720p/1080i/1080p, the aspect modeautomatically defaults to Full after turning off the TV,after changing input mode, or after changed signalresolution other than 720p/1080i/1080p.