37AdvancedRecommended AV Connections1 2 ANTAV IN• Individual components of HDMI equipment may require additional menu settings specific to each model. Pleaserefer to their respective operating instruction manuals.• When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of thisunit, the system switches to 2CH audio.(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)NoteHDMI cableAUDIOINHDMI(AV OUT)HDMI(AV OUT)Panasonic RAM theater /Panasonic Player theaterororHDMI(AV OUT)Panasonic AV amp DIGA(Panasonic DVDRecorder)Follow the connection diagrams below for HDAVI control ofa single AV piece of equipment such as a Panasonic DIGA-DVD recorder, RAM theater, or Player theater system.Refer to page 26-27 for Setup Menu settings and additionalcontrol information.Optional HDMI and/or optical cables are not provided.If connection (or setting) of equipment compatible with HDAVIcontrol is changed, switch the power of this unit Off then Onagain while the power of all equipment is On (so that theunit can correctly recognize the connected equipment) andcheck that DIGA, RAM theater, and Player theater playbackoperate.EZ SyncTM Connections■ Setting of this unit after connectionAfter making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) to “On” using the Setup menu.(p. 26-27).Note• HDMI 1 is recommended.When connecting to HDMI 2, set the input mode to HDMI 2 (p. 20) initially before connecting to HDMI 2. Afterconnection, confirm the HDMI control functions (p. 26-27).■ Connecting this unit to a DVDrecorder and AV ampWhen using an “EZ Sync” audio-videoamplifier and a compatible DIGA recorder,use a daisy chain connection as shownbelow.• One AV amp and one DIGA recorder can be operated with this unit.• Be sure to connect the AV amp between this unit and the DIGA recorder.DIGA(Panasonic DVDRecorder)HDMI(AV IN)orDigital Audio out■ Connecting this unit to the DIGA, RAM theater, or Playertheater• For DIGA: Connect with HDMI cable• For RAM theater and Player theater:Connect with the HDMI and audio cables.If audio cable is not connected, you cannot listen to the TVprogram through the theater system.HDMI(AV OUT)PanasonicHD CamcorderorBack of the TV