31AdvancedEditing and Setting ChannelsEditChannel Caption Favorite AddApply CancelManual program2 ...... Yes3 ...... Yes4 ...... Yes5 ...... YesEditCaption Favorite AddApply CancelManual program2 ...... YesSelectOKRETURN Prev.pageR Next pageG B Y3 ...... Yes4 ...... Yes5 ...... Yes6 ...... Yes7 ...... Yes8 ...... Yes9 ...... YesCannnelSignal meterSignal strength1-1ChannelCurrentPeak level30%45%Program channelCableANT inAutoManualSignal meterAuto programAll channelsAnalog onlyDigital onlyEditChannel Caption Favorite AddApply CancelManual program2 ...... Yes3 ...... Yes4 ...... Yes5 ...... YesChanges will be lost. Continue?Yes NoAutomatically searches and adds active channels to memory.Select “ANT in”Select “Auto”nextselectUse this procedure when changing setting of receivingchannels or changing the channel display.Also, use to add or skip channels from channel listmanually.Select “Edit”selectnextselect item to edit(Caption/Favorite/Add)nextSelect the item to be editedCaptionFavoriteAdd • Caption:Changes the station identifier• Favorite:Registers channel to FavoriteList• Add:Adds or skips channelsCheck the signal strength if interference is found or freezing occurs on a digital image.change channelokSignal intensity • Not available if “Cable” is selected in “ANT in”(see above).• Effective only for digital antenna channels.• If the signal is weak, check the antenna.If no problem is found, consult yourlocal dealer.NoteSelect Cable or Antenna(p. 17)• If “Lock” (p. 28) is activated and “Program channel” is selected, “Enter password.” will be displayed.Settings are made automaticallySelect scanning mode (p. 17)okselect• After completing the setting, select “Apply”. (see below 5 ).• All previously saved channels are erased.To cancel the Editok(returns to “Programchannel”)select “Yes”selectnextGo back to previous pageProceed tonext pageCaption selectCaptionCaption detail---Apply CancelSet favorite 1/31226-1 - - -Caption Favorite AddApply Cancelprogram.... YesEditCaption Favorite AddApply CancelManual program2 ...... Yes3 ...... YesCannnel•FavoriteEdit•Caption5 Select “Apply”•AddPress OK to select “Yes (add)” or “No (skip)”Select the numberRename (maximum 7 characters available)Select the station identifierselectchangeset/nextselectnextSet favoriteCaption detailCaptionselect “Apply”okMove cursor to a channel numberselectPress OK to tuneto the channel.