Panasonic Viera TC-26LE60 Operating Instructions Manual

Also see for TC-26LX60 - 26" LCD TV: Operating instructions Operating instructions manual Manual de instrucciones Operating instructions Operating instructions

Contents

Panasonic Viera TC-26LE60 Operating Instructions Manual Manual pdf 41 page image

41FAQs, etc.Technical InformationDIGITAL AUDIO OUT terminalsYou can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifierto the DIGITAL AUDIO OUT terminals.Caution• Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disableoptical output.• External speakers cannot be connected directly to OUTPUT terminals.• When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSCchannel is selected, the output will be PCM.HDMI connectionHDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connectingthe TV unit and the equipments.HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connectedto the HDMI connector using an HDMI compliant (fully wired) cable.• HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.• If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).• When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.• Audio settings can be made on the “HDMI in” menu screen. (p. 14-15)Applicable audio signal sampling frequencies (L.PCM):48 kHz, 44.1 kHz, 32 kHz(*1): The HDMI logo is displayed on an HDMI-compliant equipment.(*2): Enquire at your local digital equipment retailer shop.Caution• Use with a PC is not assumed.• All signal is reformatted before being displayed on the screen.• If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.• This HDMI connector is “type A”.• An equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S-VIDEO”, or“VIDEO” to receive analog signals.• The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080iMatch the output setting of the digital equipment.• For details of the applicable HDMI signals, see below.horizontalfrequency (kHz) verticalfrequency (Hz) COMPONENT HDMI525 (480) / 60i 15.73 59.94 * *525 (480) /60p 31.47 59.94 * *750 (720) /60p 45.00 59.94 * *1,125 (1,080) /60i 33.75 59.94 * ** Mark: Applicable input signal for Component (Y, P B, PR ) and HDMI• Signals other than above may not be displayed properly.• The above signals are reformatted for optimal viewing on your display.Input signals that can be displayedNoteControl with HDMI “HDAVI Control”HDMI connections to some Panasonic equipments allow you to enjoy easy playback.• Setup the equipment to enable this function. Read the manual of the equipment.• Switch the TV unit on again with the equipment on when connection or setup is changed.• This function may not work normally depending on the equipment condition.• The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.• Image or sound may not be available for the first few seconds when the playback starts.• Image or sound may not be available for the first few seconds when Input mode is switched.• Volume function will be displayed when adjusting the volume of the equipment.• Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.