Panasonic Viera TC-26LE60 Operating Instructions Manual

Also see for TC-26LX60 - 26" LCD TV: Operating instructions Operating instructions manual Manual de instrucciones Operating instructions Operating instructions

Contents

Panasonic Viera TC-26LE60 Operating Instructions Manual Manual pdf 21 page image

21AdvancedControl with HDMI “HDAVI Control”Operating Peripheral EquipmentOther adjustAuto power onProg-out stopOffOffCtrl with HDMI OnStandardPower saveMenuPictureAudioLockSetupTimerSetupCH scan ALLLanguageProgram channelInput labelsCCOther adjustControl with HDMI “HDAVI Control”Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV’sremote. Limited features such as automatic switching to the TV’s HDMI input are available.• This feature is limited to models incorporating Panasonic’s “Control with HDMI”. Refer to the models listed on page22 or the individual instruction manuals for compatibility information.• Depending on the cable used, this function may not be possible.Display menuSelect “Ctrl with HDMI”Select “Setup”Select “On” or “Off”■ Press to exit or return to previous screenSelect “Other adjust”When “Ctrl with HDMI” is set to “On”, at the start of DIGA playback, TV input automaticallyswitches to the input compatible with playback equipment.• If using DIGA operation and the DIGA menu is displayed, the TV input automaticallyswitches to DIGA. If TV power is Off, it switches On.When “Ctrl with HDMI” is set to “On”, the TV is automatically turned on and switched to theappropriate HDMI input whenever a “Control with HDMI” compatible DIGA (Panasonic DVDRecorder) is initially turned on and Play mode is selected.When “Ctrl with HDMI” is set to “On” and the TV is turned off, the connected DIGA (PanasonicDVD Recorder) is also automatically turned off.• DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.Power offlinkPower onlinkAutomaticinputswitching• Before using HDMI control functions, the connected equipment (DIGA) must also be set. For details, see theoperation manual for each equipment.• For equipment connection details, see p. 22.• Default setting is “On”. If no HDMI equipments are connected or standard HDMI (non- “Control with HDMI”) areused, set to “Off”. (see below)Note45123selectnextselectnextselectchange